Autodata Frame Dimensions Manual Dexterity

The Breg Knee Therapy Kit Deluxe is for people post injury or post surgical rehabilitation of the knee to help them recover. The knee therapy kit allows for a wide variety of the necessary rehabilitation therapy in the home setting. Each kit comes with an exercise instruction booklet and a collapsible bar for range-of-motion exercises (36 inches Length). Also comes with a rope and pulley to allow for a multitude of shoulder and elbow exercises, rubber tubing (3), and a door strap. The intended goals for the user are to increase activity, improve surgical healing, decrease anti-inflammatory medications, decrease pain symptoms, improve joint rehabilitation, and improve quality of life. The Breg Home Shoulder Therapy Kit is a functional rehab system designed for people recovering from shoulder surgery or injury to strengthen their shoulder. The kit is a solution for today's managed care rehab needs. The shoulder therapy kit allows for a wide variety of the necessary rehab therapy in the home setting.

Each kit comes with an exercise instruction booklet and a collapsible bar for range-of-motion exercises (36 inches length). It also comes with a rope and pulley to allow for a multitude of shoulder and elbow exercises, rubber tubing (3), and a door strap.

Assemble the 3D frame playing board then. Skill games come in all shapes and sizes. While Knot So Fast gives kids manual dexterity and spatial reasoning a. [PDF] manual autodata (28 pages) - pin nuevo manual autodata datos diesel 2013 on, autodata frame dimensions manual denverdagor, 308 motorcycles technical data manual autodata, autodata frame dimensions manual dexterity kindlstealth, 2014 key and remote programming manual autodata 14 420.

This can be used to increase activity, improve surgical healing, decrease anti-inflammatory medications, decrease pain symptoms, improve joint rehabilitation, and improve quality of life. The Doormatic Automatic Door Opener is designed for use by individuals with mobility disabilities.

It is a door opener which automatically opens and closes internal doors. No tools, drilling, or structural changes to the door or door frame is required. With the Doormatic, a simple push or pull will open or close the door. For added safety, the opener will automatically detect obstacles and stop.

An optional remote control or motion sensor is available for individuals that cannot push or pull the door. Abilitations 4-Color Raised ColorCue Paper, Grade 1, Pack of 50 a product designed for children with special needs to provide visual cues and raised, colored lines for children who need a more tactile, proprioceptive writing experience. This can be used at home or in the classroom. Each paper contains lines that are spaced to provide plenty of first-grade manuscript writing room. A pad containing 50 sheets gives teachers the flexibility to either use it for a single student or for the entire class. Abilitations Hourglass Shaped Fidget Finger Squash It, Set of 6, Multicolors is a therapeutic toy designed for children four years of age to engage in finger manipulation and fine motor dexterity work.

The child squashes each side of the Hourglass Shaped Fidget Finger Squash It. Each set comes with 6 Finger Squash-Its in a 2-tone color. The child holds them vertical or upside down to watch the colors swirl then works the colors back and forth through the narrow chamber for a great finger workout. They can be kept in a pocket, desk, school bag, purse, or in a busy bag. Step 1: The Frame The author used a 12 foot piece of 1/2 OD aluminum tubing. A solid bar or steel could be used as well. Bending the material was challenging. Most of the tubing bent was accomplished while cold, but a couple of places the author had to anneal, the aluminum for a safe bend. It is recommended to mark the bend area with a few hash marks of household hand soap (bar) to gauge the temperate. The soap marks turns black when it is at a good temperature. The author did not use any specific measuring equipment for bending; it was visualized.

The baby seat has an approximately 45-degree angle, to the bottom rail. Lots of trial fit, to make sure it clears the legs and fits the width of the seat, about 19 inches. The first bend, at the baby's head, is 14 1/2 inches wide.

Please reference the picture. What is not shown in the third picture is the spread that needed to be added at the bottom, to go from 14 inches to 19 inches. You want the upper portion to stay parallel, so the spread should happen at the bottom. The author also added a bend at the tip of the head area that allowed the fabric to form a nice headrest transition, when tight on the frame. (Reference photo 4 for details.) The author did not include a picture of the installed brace that was added across the frame. The purpose of the bar is to keep it from pulling in toward the center when the baby is seated.

You can see the positioning of this in the pattern photo, in the next step. It runs at the level of the baby's feet. The author needed the frame to remain taut against the fabric sling.

However, the author didn't want to drill a hole in the aluminum tubing and weaken the structure. To accommodate, the author drilled the brace, cross piece, to fit the curve of the aluminum tube, photos 5 and 6. The author drilled a hole to have tabs on each side of the pipe. The tabs are wrapped around the tubing, as in drawings 7 and 8. Epoxy to create a smooth surface for the fabric to slide on.

Step 2: The Sling The seat is a sleeve that slides onto the frame and is removable and washable. It is the same on both sides, apart from the restraint, that is only on the front side, so be sure to cut two of each piece. Please reference the picture for assembly. The author recommends at least triple stitching all of the seams, and to reinforce higher stress points on the seat area with a strong binding tape. Step 3: Attachment For the attachment system, the author used 2 pieces of 7/8 inches OD 5/8 inches ID X 16' aluminum tubing. These pieces were drilled and tapped, with 1/4 inches hole, 2 inches from the end. The author used a 1 inches threaded 1/4 inches bolt, with a plastic wing nut. The wing nut is tightened onto the smaller tubing, after the seat, is inserted into the mount.

Pretty simple, but quite effective, and secure. The two receiver tubes, slide along side the wheelchair seat and are secured in place with pipe clamps, around the frame of the chair. In the photo, the author has temporarily attached the seat with zap straps, which worked quite well. The metal clamps were used for added security. Step 4: Ta Da! The product is ready for use. The School Specialty Motion Table stimulates the nervous system to level out in extreme behaviors caused by a variety of conditions such as cerebral palsy, autism, sensory impairment, sleeping disorders, learning disabilities, etc.

This allows the child or adult patient to respond appropriately and improve the results of their therapy sessions and home programming by organizing the nervous system. This device is more effective and unlike other devices that usually move with a degree of vertical motion. Comes with wheels, remote control, and a variable speed dial.

Vestibular system allows users to work more effectively, often for long periods of time. Provides smooth, horizontal 'Vibra-Glide' action. Abilitations Rapper Snappers Corrugated Tube for Auditory, Visual and Tactile Feedback - Set of are therapeutic aids designed for children with special needs to provide auditory, visual, and tactile feedback while strengthening upper extremity musculature. A Rapper Snapper can be stretched to its full length of 30 inches or crunched back down to 8 inches.

It can be twisted and bent into an endless number of shapes and designs connected together to form one long tube or stretched and twirled to create a whistling sound. Guidecraft PowerClix® Solids 94 Piece Set is designed for children ages 3 and up to practice eye hand coordination while learning to count as well as to develop motor, counting, sequencing, and color recognition skills. They are colorful, solid translucent plastics and geometric shapes that allow for open-ended, creativity-inspiring constructions. They can also be used for teaching and exploring solid geometry. Both 2D and 3D forms may be built by distilling the structures down to simple solid geometric shapes, furthering their understanding of how mass and volume are used to model an object.

Abilitations Oneup Innovations Sportime Spacewalk - 63 x 45 inches is a single-unit foam filled large-motor challenge designed for people with physical disabilities to walk, crawl, roll, jump, and do other moving activities to work on gross motor and balance abilities. To use, a teacher or therapist must create a secure area for motor planning and exploring with SpaceWalk. The 'pillow' can also be used to provide deep touch when a client is sandwich between two of them rolled up in one. Because of the unevenness, clients can also work on balance and coordination. The Rock-King X3000 Wheel Chair Kit is designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. The wheelchair kit converts the user's wheelchair into a rocking chair. The Tilt Position, which helps prevent pressure sores, is great for napping, reading, and conversation.

The Upright Position is ideal for seating at dining and activity tables. Ergonomic design supports head, shoulders, and lower back for exceptional comfort. The adjustable lateral supports provide customized trunk stability and adjustable seat provides leg comfort and aids self-propulsion. Comfortable Crypton® padded seat is durable and washable. Reversible covers. Seat Height from Floor: 15 to 21 inches.

Overall Width: 28.5 inches. Chair Weight (no accessories): 63 pounds. Overall Length (without footrests): 32 inches. Seat Width: 20 inches. Seat Depth: 16 inches.

Height of Backrest from Seat: 32 inches. Weight Capacity: 350 pounds. Kit includes: 24-inch. Wheels; black frame finish; footrests with vertical adjustment; lateral supports; and heal-leg strap. Cushion Material: Crypton fabric reversible cushion and standard head pillow in Ambiance-Chocolate pattern.

The OXO Chopped Salad Scissors is a pair of scissors designed to help individuals with upper extremity disabilities or who are blind or visually impaired prepare a salad. This device has micro-serrated, stainless steel blades that can chop up salad ingredients directly in a bowl.

The blades are rounded so they will not scratch or damage the bowl, and are wide enough when closed to toss all of the salad ingredients together. The handle, which has a soft non-slip grip, features an integrated locking tab that keeps the blades safely closed when not in use. The OXO Chopped Salad Scissors must be hand washed. Veyo Mittyz Winter Gloves are designed for children from 6 months through 5 years who have a cerebral palsy.

Veyo Mittyz lack a thumbhole, allowing the user to slip onto their hands with minimal effort. There is room in the top area for hands to open, close, and bend. This means that the glove will still be comfortable for children with spasticity in their hands. To keep from falling off, they have a buckle for tightening, as well as a fastener at the base. They come in a variety of designs that are kid-friendly, such as tiger paws, butterflies, and snowflakes. Flip inside-out for easy drying or cleaning.

The zoodi is a hands-free protective case for iPad Air and Air 2 designed with a strap to allows users the ability to use their tablet with both hands that can be used by individuals with upper extremity or fine motor disabilities or the use of only one hand. Zoodi’s strap system provides protection from dropping the iPad when on-the-go and is easily transported by just slinging it to the side. In addition to the hands-free option, zoodi can be propped up on a tabletop for easy viewing and comes in several color combinations. The 889 D Scooter, or the Shoprider 889D Large New Model scooter, is a mobility product for those individuals with walking or mobility disabilities. It has been specifically designed to be a wide mobility scooter.

Features include 2.0hp motor, 800mm wide seat that slides for extra legroom, adjustable loop steering tiller, sliding seat, and soft ride suspension. Other features include front shopping basket, horn, 330-millimeter pneumatic tires, width adjustable armrests, indicators, hazard lights, and LED battery warning level. Airgo Excursion Rollator X-Wide is a rollator designed for individuals with lower extremity and walking disabilities to allow for greater mobility. Suitable for people from 5 feet to 6 feet, 2 inches. Easy to fold by a pull of the strap. Ultra-light frame makes allows for lifting and storage. Ergo-form handgrips fit comfortably and place your hand at a natural angle for better brake access.

Padded seat and backrest for added comfort. Locks in open position for added safety. Reflective trim for added visibility in the dark. Easy to activate hand brakes. Eight-inch Comfort-Grip non-marring wheels are suitable for ideal for indoor and outdoor. Tool-free brake adjustment. Reflective soft basket can be removed and is machine washable.

The Pearl Wheelchair is a mobility product for individuals who are aging or have mobility and walking disabilities. Features include: • Anti-corrosive folding frame. • Padded adjustable height armrests. • Lift up armrests.

• Adjustable height rear handles. • Adjustable and comfortable velcro backrest. • 24-inch solid puncture-proof tires. • 7-inch front rubber tires, tires-stable castor angle. • 4 stages of seat height adjustment. • Hard wearing nylon upholstery. • Height adjustable foot plates.

• Heel strap and foot plate angle adjustment. • Manual brake on the rear wheels. • Easily removable rear wheels. Anti-tip wheels. Options: Available in pearlescent white.

Measurements: • Seat Widths: 18-inch (460 millimeters); 20-inch (510 millimeters) • Seat Depth: 440 millimeters • Seat Height: 410 millimeters Capacity: • 18-inch Weight Capacity: 120 kilograms. • 20-inch Weight Capacity: 130 kilograms. Weight: • Wheelchair weight 18-inch: 17.7 kilograms • Wheelchair weight 20-inch: 18.7 kilograms Options: Available in pearlescent white. Measurements: • Seat Widths: 18-inch (460 millimeters); 20-inch (510 millimeters) • Seat Depth: 440 millimeters • Seat Height: 410 millimeters Capacity: • 18-inch Weight Capacity: 120 kilograms. • 20-inch Weight Capacity: 130 kilograms. Weight: 18-inch: 17.7 kilograms. 20-inch: 18.7 kilograms. 888SE Scooter is a mobility product for those individuals with walking or mobility disabilities.

This medium-sized scooter model is ideal for people on the move with its robust design. Features includes: • 50 amp battery capacity • 8 amp charger • Front lights • Gas adjustable steering tiller • PU Loop Tiller allows for more accurate steering • Complete with a horn • 260-millimeter pneumatic tires • Rear adjustable suspension • Width adjustable and lift up armrests • Front tiller shopping basket • Sliding and rotating seat • Light Emitting Diode battery level warning light • Anti Tip wheels • Comfortable high back captains seat • Looped handle bar for finger steering • Easy access battery compartment • Tie down points for secure transport • Electromagnetic brake.

The Celebrity DX Scooter is a scooter designed for people with mobility disabilities. The scooter features speed reduction technology that automatically reduces travel speed while turning corner. The auto-latching lock up allows for quick disassembly and assembly, and tie down points allows for transport of the scooter when it is unoccupied. Other features include: • Top speed of up to 9.65 kilometers/hour (6 miles per hour).

• Front basket and rearview mirror standard. • Tight turning radius of 149.86 centimeters (59 inches).

• Includes standard angle-adjustable light. • Front frame-mounted seat-post for optimal stability. • High visibility reflector.

• Microprocessor-based controller. • Tiller rotation lock permits tiller tobe used as a handle during transport. Etac Clean Self Propelling Shower Commode is a shower commode with rear wheels positioned to maximize the maneuverability designed for bariatric patients’ hygienic use (with 24-inch self-propelling wheels). Side transfers can be performed safely due to sufficient seat space in front of the wheels.

Brake handles are positioned just underneath the seat not to obstruct transfer but still being easy to reach. The seat has a recess at the front and is fully open at the rear which enables unassisted intimate hygiene.

Regular cleaning and inspection of castors. Patients or caregivers clean the chair with a solvent-free detergent which has a pH of 6-9, or with a 70% disinfectant solution. Can be decontaminated at a maximum temp of 85 degrees Celsius. Dimensions: Seat: 55 centimeters x 48 centimeters x 44 centimeters (H x W x D). Measurements: Width between armrests: 43.5 centimeters. Total Width: 69 centimeters.

Weight: Product Weight: 20 kilograms. Weight Capacity: 130 kilograms. Measurements: • Seat Height: 55 centimeters. • Width between armrests: 43.5 centimeters.

• Total Width: 69 centimeters. • Seat Width: 48 centimeters. • Seat Depth: 44 centimeters. Weight: Product Weight: 20 kilograms. Weight Capacity: 130 kilograms. Clean Self Propelling Shower Commode. The Etac Swift Multifunction Shower Chair and Commode can be used as a commode as well as a shower chair or over the toilet as a freestanding toilet seat raiser.

It is designed with ease of control, functionality, and simplicity. It is a modular, height-adjustable chair with detachable padding for the seat and backrest. The pan has a lid with a handle and is easily removed from above. The seat can be set at a slight angle to make it easier for the user to rise from the chair. Backrest and armrests may easily be removed if necessary.

It is portable. To clean, use a solvent-free cleaning agent with a pH level between 6-9, or with a 70% disinfectant solution. Can be cleaned with hot water up to a maximum of 85 Degrees Celsius 9 if required. The Ornamin Thermo Range: Thermo Mug - Model 210 is an ergonomic drinking mug designed for users with restricted movement of the neck to drink easily.

These Thermo mugs have large ergonomic sized handles for easy and safe grasp. These mugs also have a hidden Thermo function, which ensures that hot drinks remain hot and cold beverages stay cool for longer. The Thermo Mug Vital has an internal cone that assists the drinking action. The function in the design of the Vital Mug is hidden therefore users do not feel discriminated against because it appears to be a normal mug. The Ezy-As Compression Stocking Garment Applicator is a dressing aid for individuals facing dexterity complications or with one hand designed to assist them with fitting closed and open pressure garments to upper and lower limbs.

The stocking applicator is designed to assist with a range of different pressure garments including open and closed toe stockings and arm sleeves. To use, place the Ezy-As stocking applicator on a suitable surface with the elongated hole facing the user. Then, place the compression stocking inside the U-shaped Ezy-As, with the heel of the stocking facing the elongated hole. Next, pull the top of the stocking over the Ezy-As and slide it down its sides. Stop when the placement of the heel is slightly over the top and in the center of the U-section.

While seated, place the applicator over their toes and hold the heel pocket as their toes enter the stocking. Finally, release the heel pocket of the stocking when it is in line with their heel.

Dragon NaturallySpeaking is a voice input and voice output program designed for use by individuals with spinal cord injury or upper extremity, vision, or learning disabilities. This voice recognition system enables hands-free operation of personal computers and permits users to speak at their normal pace. The program also permits hands-free mouse operation using MouseGrid technology. Users can create, move, edit, and format text by voice command in virtually all Windows applications, including word processors, spreadsheets, web browsers, and more. The program integrates with Microsoft Word, Microsoft Outlook, and most other Windows applications, allowing spoken text to appear immediately in a document.

Select-and-Say editing permits editing by voice. Corrections can be made by voice or by keyboard, and corrections can be made immediately or delayed to a later time. The program also offers dictation playback, enabling the user to hear what he or she has written before editing. Text-to-speech capability also enables users to have their own documents or other files such as e-mail read aloud. The program supports multiple users and each user 'trains' the system as it is being used; the system learns accents, dialects, and individual pronunciations automatically.

The program has a 230,000-word vocabulary, with a 30,000-word plus active vocabulary. The vocabulary includes spelling, pronunciation, punctuation, usage, and context recognition information. This program also allows new words, specialized terms, and names to be automatically added in a few steps. The Vocabulary Builder searches text files, locates words used by the user, and enters spelling, pronunciation, and context recognition information. A high-quality headset microphone is included. Available editions include Home, Professional, Legal, and Medical. COMPATIBILITY: For use on IBM and compatible computers.

SYSTEM REQUIREMENTS: Microsoft Windows XP (SP2 or SP3), Server 2003, Server 2008, Vista or 7; 1 gigahertz (GHz) or faster Pentium processor; 2.5 gigabytes (GB) of available hard disk space; 1 GB RAM (Windows XP or Vista) or 2 GB RAM (Windows 7 and Windows Server 2003/2008); Sound Blaster 16 or compatible sound card; a DVD-ROM drive; and Internet Explorer 6 or higher. The NuEyes smart glasses are designed for individuals with visual impairment, low vision, macular degeneration, glaucoma, diabetic retinopathy, retinitis pigmentosa, or other visual conditions. NuEyes is wearable head-mounted device, hands-free wearable technology that gives the user CCTV and text-to speech capabilities in a headset about the size of a pair of sunglasses. NuEyes can magnify up to 12x and displays enhanced versions of anything that the user looks. Features include: • Ability for user to read, write, stream TV and movies, play cards using NuEyes • Watch TV and Movies • See the faces of loved ones • Variable Magnification from 1x-12x • Various contrast and color changes • Voice Activation • Wireless • OCR.

Magnification: Up to 12x zoom. Battery: 2 hour battery internal and additional 10 hour battery external. Warranty: 2 years through manufacturer. Color: Black. Do-Eat Performance-Based Assessment Tool for Children is a performance-based assessment tool for children with developmental coordination disorder (DCD), attention deficit hyperactivity disorder (ADHD), and both verbal and non-verbal learning disabilities. Features of this assessment tool include: • Evaluates areas of strength and difficulty in both ADL and iADL and helps define customized therapeutic goals for intervention • Focuses on food preparation, drawing, writing, and cutting • Examines sensory-motor performance skills, executive function, and behavioral and emotional measures • Utilizes both top-down and bottom-up approaches • Contains reliability and validity data. Relaxis is a sleeping aid designed to help improve the quality of sleep for individuals with primary Restless Legs Syndrome (RLS).

Relaxis should be placed on top of the bed lying flat, underneath the user’s legs. When he or she starts to feel the onset of RLS symptoms, all he has to do is press the Power button on the controller and adjust the vibration intensity to his preferred level by pressing the “+” or “-“ buttons. Once activated, Relaxis will start emitting vibratory counterstimulation - therapeutic vibrations intended to stimulate the nerves in the user’s legs to interrupt the RLS episode from advancing further. Relaxis will run on its own and shut off automatically after 35 minutes. It is available only with a doctor’s prescription. The MTip Crutch Tip is an enhanced crutch tip designed for use by individuals with mobility disabilities. The crutch tip increases the efficiency, stability, and safety of walking with crutches.

With a rolling motion, the MTip provides multiple points of traction and allows a crutch user to use their own weight in an assisting motion. These crutch tips are designed to increase grip, even at an angled approach. The tips feature a tread design that increases resistance to slipping on wet surfaces. These tips fit all crutches with a lower tube diameter of.75 to 7/8 inch.

Color Blind Pal is a cellular phone application that helps people who are color blind see the colors around them. It also lets people with normal vision see what it's like to be color blind.

It distinguishes between colors and, for example, its user could see the color 'bold brown.' User can use the Color Filter to shift colors that are hard to distinguish towards colors that are easier to distinguish. The Color Filter can also simulate any type of color blindness. The user will open the preferences to select their color blindness type. Press 'Inspecting Color' or 'Filtering Colors' to switch between the two modes. The user can find out exactly what any color is, read any color-coded map, chart, or graph.

Google Translate is an algorithm that can be used to help students with cognitive or learning disabilities abroad or some place they are unfamiliar. With Google Translate, the user can translate between 103 languages by typing. There is a Tap to Translate feature in which the user can copy text in any app and the translation pops up. Without an internet connection, the user can translate 52 languages. A phone's camera can be used to translate text instantly in 29 languages. In Camera Mode, the user can take pictures of text for higher-quality translations in 37 languages. In Conversation Mode there is two-way instant speech translation in 32 languages.

The user can draw characters instead of using the keyboard in 93 languages. In addition, there is a Phrasebook that allows the user to star and save translations for future reference in any language. IFTTT is a functional application for cellular phones designed to enhance accessibility on phones for people with severe physical disabilities. The app allows different apps to work together so to make one app do virtually anything with virtually any other app. JABtalk is an phone application designed to help non-verbal adults and kids communicate.

A user can build sentences from words, organize words into user-defined categories, import pictures and audio, and convert text to speech with its text-to-speech capabilities. The application enables interpersonal communication through Text-to-Speech from Selection Tables of construction of the user.

A Text-to-Speech application is required. Users can select the number of the words per sentence (5-10-15-20-30-40-50). There are additional settings on the main menu for editing tables (manage screen).

Users can lock the configuration of the application with a 4 digit code. This application supports full-screen. Autism iHelp-WH Questions is a teaching app developed to help children learn how to answer questions. It includes three levels of play.

Each level presents questions and then gives answer choices with real pictures. The levels also provide a variety of options to increase difficulty. Level 1 questions include two sets of who, what, and where questions and a combination of all questions. Level 2 questions are presented in categories: animals, colors, play, and learn; two groups of community questions; where questions; and a combination of all questions.

Level 3 questions include when, who, what, where, why, how, and a combination of all the questions. Options can be chosen at each level. These include the number of answer choices given (2, 3, or 4), question text or answer text given, audio off or on and female or male voice used. In addition, a home and next page can be used. For each question set a progress report is developed. The last three performances for each learning activity can be averaged in this report. The Exigo is a two-screen magnifier for distance viewing and desktop tasks.

The device is intended for users with low vision or who are partly blind, and can be useful for students in the classroom.The Exigo magnifier is designed to let users simultaneously read at a distance (such as a whiteboard) and also read and write at their desk. Includes 2 cameras and 10.5 inch displays. One camera is for distance viewing, while the other one for desktop tasks. TThe user can change a variety of parameters in the MIRAcle application menu both for distance and near viewing: font size, color schemes, color and size of th e line marker, visible area (mask), color, and number of icons visible on the display.

The appilcation allows the user to freeze an image and save it in the memory of the device. Additional features include mage freeze, adjustable mask, wireless communication, and reads on lines. Magnification: 25 x near view and 30 x distance view. Color schemes: 9 predefined color schemes. Battery life: Up to 5 hours. Memory: SD card reader up 128 gigabytes. Text transfer: OCRed text transfer to computer screen.

Display screen: 2 x 10.5 inches 2560 x 1600 (WQXGA) and 2 x CMOS 8.0 megapixels camera. Weight: 2245 grams. Dimension (folded): 45 x 18 x 15 centimeters Dimension (unfolded): 53 x 40 x 16 centimeters Includes: 2 x Samsung Galaxy Tab S 10.5 inch tablets, carrying case, screen cleaning cloth, reading line guide, charger, instruction, USB cable. The Pearl 5 is an electronic magnifier design for those with low vision or who are partially blind. The device runs on Samsung mobile devices powered by Android operating system, and enhances and improves traditional electronic magnifiers. This electronic magnifier features a reading line guide to help a reader stay on the line while reading. It can even be used for distance viewing.

Includes a detachable stand that can be removed without compromising the quality of the magnified image. Other features include image freeze, image saver, line maker, and wireless image projector. The Blanket Lift Bar Support is designed to create a free space at the end of the bed between the covers and the mattress to allow free foot movement. It can be used for individuals recovering from hip, knee or back surgery; peripheral neuropathy; and users who need relief from knee, foot, ankle and toe pressure while in bed. ToeSpace Blanket Support lifts blankets up off the users feet by raising the blanket and building a canopy, blanket cradle, or foot tent over the users feet and legs to relieve pressure.

The Zoomax Snow S is a handheld video magnifier for people with low vision with conditions such as AMD, Glaucoma, Macular degeneration, or Retinis pigmentosa. The Zoomax Snow S features a 4.7 inch display, HD screen, HD Camera, and Optical Character Recognition (OCR) and Text-To-Speach (TTS) function.

The Snow S can recognize regular printed characters from short texts and numbers and read it out aloud for the user. It enables the visually impaired to read materials with less content in daily life such as labels, business card, pill bottle, price tag, receipt, and more. Five languages are available. Additional features include stand-by mode, USB Type-C port offers reversible plug orientation, and a flexible writing stand. Magnification: 4x to 17x (not use reading stand) / 2.1x to 8.5x (use reading stand). Display modes: 10 modes. Focus: Auto focus.

Screen: 4.7 inches widescreen TFT LCD. Screen resolution: 1280 x 720 pixels. Camera: 5 megapixel. Camera resolution: 1280 x 720 pixels.

TV output: PAL/NTSC. Power saving mode: Enter into standby mode automatically when it has not been used for 3 minutes. Battery: Rechargeable lithium battery of around 3.5 hours continuous use; 4 hours charging time.

Input: 110 - 240 volts. Output: 5 volts / 1 Amps. Weight: 4.9 ounces (without battery). Dimensions: 160 millimeters x 80 millimeters x 24.8 millimeters. Operation and storage condition: Humidity. Acapela Bilingual Voices is additional software for a Prentke Romich Company (PRC) communicator designed for children with communication disabilities who are bilingual to better understand their environment. Acapela bilingual voices provide a way for device users who need to communicate in both English and Spanish to use the same voice in both situations.

Each voice comes with both an American English and an American Spanish version that can be unlocked within NuVoice and assigned for speech, prompts, or both. The Anti-Vibration Gloves is designed to help absorb vibration from pneumatic and vibrating tools, and repetitive motions, to improve performance and safety. Anti-vibration gloves dampen the shaking when using power tools and driving equipment. Reducing the vibrations will lessen the risk of developing carpal tunnel syndrome and reduce the symptoms. Features synthetic leather palm with strategically placed memory foam, reinforced fingertips and saddle.

Has TPR on back of hand for protection and neoprene cuff for support, plus terry cloth on thumb for wiping sweat and debris. The Synthetic leather palm features strategically placed 5 millimeters memory foam underneath nonslip reinforcement material to help absorb tool vibrations and provide superior grip and durability. Reinforced fingertips and saddle increase the durability of these critical wear areas. The back of the hand has ergonomically designed TPR for added protection. Neoprene cuff with adjustable closure offers excellent wrist and hand support. Terry cloth on thumb for wiping sweat and debris. Machine washable and air dry. NuPoint Head-Tracking Accessory Kit is an accessory to Prentke Romich Company communication devices designed for people with little of no use of the hands. Using optical sensors, NuPoint tracks a small reflective dot on the user’s forehead, glasses or other convenient spot converting the natural movement of the user’s head to accurately control the pointer on the screen. Key activations are made by dwelling over the desired key. Additional movement settings, like vertical and horizontal controls, help customize control of the pointer to optimize the user’s accuracy and ease of use. NuPoint plugs directly into the device requiring no additional power or cables.

The Standard KD Smart Chair Electric Wheelchair is an FDA approved mobility device designed for people with lower extremity disabilities and spinal cord injury. It is made of strong aluminum alloy, weighs 50 pounds, and can support passengers weighing up to 265 pounds. It can be folded in seconds and transported in a wheelchair user’s car, SUV, or truck. The Smart Chair's Standard model comes with a tight turning radius of 31.5 inches. Wheelchair users can travel through outdoor terrains with its 6 inch front and rear wheel tires.

Features a removable seat and seat cover for easy cleaning, adjustable arm rests that can be raised, a joystick that can be mounted on left or right side arm rest. The Pre-Writing Curriculum Enrichment Series is a three-book series published by Therapro that offers a variety of thematically related developmental activities to help children develop writing skills. Activities include: Trace and Draw, Crafts and Costumes, Cooking, Stories to Color and Read, and Games. Many of the worksheets are reproducible. Helps all levels of development with hand skills, eye-hand coordination, perception, and sensory-motor awareness. Ideal for preschool and kindergarten programs. Evernote is an app to help individuals stay organized. It can be helpful for users with learning disabilites, autism, or anyone who would benefit from organization tools. Users can take notes, create to-do lists, and save things they find online into Evernote.

Evernote syncs everything between the user's phone, tablet, and the computer automatically. The NuEye™ Tracking System Accent 1400, Accent 1200, and Accent 1000 is an accessory compatible with the Accent 1400, Accent 1200, and Accent 1000 that allows someone with an upper extremity disability to access full communication and computing power with their eyes. It is ideal for children and adults who need hands-free and switch-free device access. Real time video view of user alignment, off-screen toolbox control, and ability to highlight keys, real time cursor, and/or fixation pointer, as well as default and custom user profiles, all while maintaining very low power consumption. Binocular and monocular gaze and pupil data. Validation of actual calibration, predictive selection, works with most eyeglasses and contact lenses. Easy to pause tracking system; blink, dwell, and switch selection; 0, 1, 2, 5, and 9-point calibration with variable calibration stimulus; variable fixation window size and sample averaging; custom window dwell time; large track box area and ability to freely move head.

The Clarity™ Symbol Set is a colorful symbol set from Liberator (a Prentke Romich Company) designed for children with communication disabilities to allow them to communicate easier with others. This symbol set comprises over 40,000 symbols covering all aspects of language use. Many of the symbols contain grammatical markers to help learners to develop language, syntax, and literacy skills.

Clarity Symbols are rule driven and logical. Clarity supports education by providing 3D pictures of computer keys to allow for the creation of unique user-specific keyboards; including homophones and homonyms to help reduce the inappropriate use of the symbols; allowing you to change the picture-word labels depending on a client's personal preferences; and including symbols to support interacting with literacy such as turn the page, and point to the word. Using Clarity with PRC's PASS™ (PRC Application and Support Software), users may create cheat sheets, flashcards, manual boards, and vocabulary sorts. The Gripeeze Home And Garden Gloves is designed for users with arthritis, carpel tunnel, multiple sclerosis, weak grip, injury, and other physical and medical conditions effecting a users loss of grip or poor grip on objects. The pair of gloves are made from neoprene and have features that allow users to comfortably handle any task in and around the garden and home. The neoprene material helps lock in moisture and keeps the hands warm when carrying out gardening tasks. The pimple Poly Dot palms are also unique and graspable even when wet, making these very practical and durable.

The gloves also get more wrist support by applying the double wrist strapping system giving you ultimate support for your wrists, perfect for weak joints. The Gripeeze strapping can also be neatly wrapped away when not needed by simply twisting the strap 90 degrees and fixing to the added Velcro wrist cuff. Can be used for bedding, potting, planting and pruning and using tools and equipment in the garden and around the home. The Z1 Auto Unplugged Bundle is a continuous positive airway pressure (CPAP) machine designed to help individuals with sleep apnea breathe more regularly as they sleep. Rather than delivering one constant pressure, the Z1 Auto responds to the user’s breathing pattern thousands of times per night and adjusts to his or her needs in real-time. All of the Z1 Auto’s data can be synced wirelessly to the user’s iOS device and accessed through the companion mobile app called Nitelog™. The user can review his data and share it with his doctor directly from this app.

The Z1 Auto Unplugged Bundle includes an integrated battery system called the PowerShell™, which can deliver a full night of cord-free power on a fully-charged battery. The Z1 Auto CPAP Machine comes with the PowerShell™, an overnight battery, a battery shuttle, a power supply and cord, a USB cable, a custom tube adapter, a 4-inch slim style CPAP tube, an end cap, 2 filters, and a heat/moisture exchanger (HME). The Z1 Auto is travel-friendly and requires a valid U.S. Prescription to program and ship. The ErgoMates Wearable Anti-Fatigue Mats is designed for users with ankle pain, arthritis, back pain, chronic fatigue syndrome, fibromyalgia, foot pain, fused vertebrae, herniated disc, hip pain and more.

The shoe cushions in the work shop provide padding to stand on while doing maintenance and making repairs on tools and equipment. Standing and walking on concrete surfaces for such duration will cause fatigue and stress to worker’s legs and back joints. Padded shoes would cushion the affects of standing for so long each day.

A worker with plantar faschiitis would find relief by wearing the ErgoMates Wearable Ant-Fatigue Mat rather than causing stress to the feet by wearing less cushioned shoes. Mats can actually be strapped to your shoes! Anti-fatigue support is no longer limited by the size of the mat. Cushioned sole also reduces the impact of walking or standing on hard, smooth surfaces.

Perfect for areas where a standard anti-fatigue mat is impractical. PVC vinyl base with EPDM foam and nylon strapping. Fully adjustable strapping system fits most footwear. The VarioUltra - the smart braille display is designed for use by individuals who are blind or have low vision. The device is a braille display to support multiple simultaneous connections to the users computer and mobile devices via 1 USB and 4 channels of Bluetooth. Dimensions and Weight: VarioUltra 20: 7.4 inches (Width) x 3.5 inches (Depth) x 0.7 inches (Height) and 0.7 pounds weight.

VarioUltra 40: 12.4 inches (Width) x 3.5 inches (Dept) x 0.7 inches (Height) and 1.1 pounds weight. Device Operating System: Windows CE 6.0. Supported Operating Systems: Windows, Mac, iOS, Android, and Linux. Connectivity: 1 USB connection and 4 Bluetooth connections. USB Ports:USB 2.0 port for use with USB memory sticks. Micro USB for charging and for connecting with a computer, and for connecting a USB QWERTY keyboard Internal storage: 32 Gigabytes RAM: 256 Megabytes. External storage: none provided, though users can use a standard USB stick, or connect VarioUltra to their computer as an external drive Battery life: 8 hours of continuous, connected use.

12 hours if using as a notetaker, unconnected. Note that the battery is internal and not user replaceable.

Manufacturer's warranty: 2 years. Trace the 8S is ac activity crafted in part to enhance occupational therapy patients with Ataxia and other fine motor disabilities’ visual-motor skills, scanning skills, brain integration, oculomotor skills, working memory and attention and focus. Trace the 8s is based on the infinity sign that has been modified to the Lazy 8. There are many other activities that can be incorporated into the exercise such as increasing the number of '8's' and adding shapes, letters, numbers, words and spaces into the design. Directions: Children and adults begin by positioning the first chart at their nose (midline) and use their finger or dry erase pen to trace the smallest ring on the left through the middle of the design up to the smallest ring on the right and around to complete the pattern.

Each successive ring is followed in the same pattern. This is continued for the next two rings. As the charts progress they include shapes, letters, numbers and words. The individual can be asked to identify what their pen is going over, or to color a shape with a pen for scanning skills, or many other possibilities. The tracing is intended to be done slowly, fluidly and with a fair amount of accuracy.

Blindfold Spin And Solve is a fully accessible phrase guessing game functional application to be used by both sighted and visually impaired people, designed for rapid audio play. Two opponents take turns spinning a wheel to determine the cash prize they win if they guess a letter in the phrase, or the entire phrase, or they can buy a vowel.

If they guess right, they keep spinning the wheel and guessing more letters, until they determine the entire phrase. For example, one of the phrases in the game is 'more fun than a barrel of monkeys,' and when the game starts out, it tells the player that there are 7 words in the phrase and that the first word has 4 letters, the second word has 3 letters, the third word has 4 letters, and so on. Blindfold Color Crush is a fully accessible functional application that is a tile-based game created for both sighted and visually impaired people, designed for rapid audio play. This is a game where the playing area consists of small rectangular, square, parallelogram, or hexagonal graphic images, referred to as tiles. The objective of Blindfold Color Crush is to remove as many colored gems as possible, by swapping adjacent gems, to get 3 or more similar colored gems in a row. A single player can set the game to identify gems as color names, such as red or blue, or fruits, animals, or numbers.

Once the player removes many gems, they move on to the next level. Blindfold Color Crush comes with a Beginner Game, a Standard game, and a Timed Trial game.

The Smart-Scooter is a self-driving scooter designed to help the disabled live independent lives. The self-driving technology has been integrated into a mobility scooter, allowing users to scoot around without constantly operating the controls. The smart scooter manages the navigation and obstacle avoidance all on its own, even indoors, as recently conducted tests have shown. This can be a serious benefit for users wishing to live independent lives, as the technology takes over nearly the entire aspect of personal mobility. Blindfold Simon is a fully accessible audio/mobile game that is similar to the memory game Simon. As the player plays, one more step is added to the sequence they are to repeat.

Each level is a continuation of the previous level. All action sequences are iPhone or iPad gestures, such as swipe up, down, left or right, or tapping with one finger/two fingers. Each level completed gives the player fake coins and they move on. A two player mode allows the players to pass the iPhone back and forth and as they move on, the game increases in variation of gestures.

Changes to the game may be made in settings. Blindfold Crazy Eights is a fully accessible Crazy Eights card game for both sighted and visually impaired people, designed for rapid audio play. Blindfold Crazy Eights includes several variants of Crazy Eights, such as discard or draw, and discard or draw until the player can discard. This game is customizable and allows players to choose their own rules. Players play the game by listening to information and play against one, two, or three computer opponents. They flick up or down to hear the cards and tap to play a card or draw from the deck. A complete guide to the gestures is included in the help. Blindfold Crazy Eights tells the player if a card can be played and players can customize the game to their liking: how much extra information is spoken and how quickly it is spoken.

Blindfold Wildcard is a fully accessible card game that is a variant of the game 'UNO' for both sighted and visually impaired people, designed for rapid audio play. Blindfold Wildcard includes several modes of play, such as discard or draw. Since there are many rules choices for the game, it can be customized.

No sight is required since it is played by listening. Players flick up or down to hear the cards, and tap to play a card or draw from the deck. A complete guide to the gestures is included in the help. Blindfold Wildcard tells players if a card can be played. Customize how much extra information is spoken and how quickly it is spoken. There is a Starter Pack and in-app upgrade gives unlimited play. Blindfold Cryptogram is a fully accessible Cryptogram game for both sighted and visually impaired people, designed for rapid audio play. Blindfold Cryptogram comes with 5 assorted Cryptogram quotes by famous people.

Categories include age, change, computers, being cool and education. The game is entirely controlled through gestures. It does not require voice-over but is fully compatible with voice-over. The Cryptogram puzzle board is not visible; instead, the player engages by listening. They flick left and right to move one letter at a time, and hear the encrypted letter. The player swipes with 2 fingers to move one word left, or one word right and swipes up to hear the entire encrypted puzzle, and the solution. The solution can be entered using a Bluetooth keypad, using the alphabet at the bottom of the screen, or using a popup keypad. The popup keypad also provides buttons for getting hints, and a frequency table.

The player can customize the game to their liking: how much extra information is spoken and how quickly it is spoken. Blindfold Spades is a fully accessible Spades card game for both sighted and visually impaired people, designed for rapid audio play. Blindfold Spades is a trick taking game where the spade suit is always trump.

The goal is to bid at least the number of tricks players bid. A help guide on how to play Spades is included with the app. Users can customize the game including: how much extra information is spoken and how quickly it is spoken, how many sound effects are used amongst other things. There is a STARTER PACK in-app upgrade that unlocks all advanced features and allows 3 or 4 computer opponents. There are 2 extra games packs available as in-app purchases.a.

Blindfold Dominoes is a fully accessible dominoes tile game for both sighted and visually impaired people, designed for rapid audio play on a mobile device. Blindfold Dominoes comes with a blocking game, where up to 3 computer opponents and the player each place a matching domino on the table until one player runs out of tiles, or no one can move. The winner gets the points of the losing player’s tiles. Customize how much extra information is spoken and how quickly it is spoken, how many sound effects are used amongst other things. Blindfold Cat and Mouse Solitaire is a fully accessible card game inspired by the Skipbo card game, for both sighted and visually impaired people, designed for rapid audio play. The objective of the game is to be the first one to empty a stock pile.

There is a stock pile of 30 cards, 4 discard piles, and the 5 cards that each player holds. The deck consists of cards from 1 to 12. The game starts by players playing a 1 card and putting it into a build pile. Then if they have a 2 card, they play it, then a 3 card and so on, until they play a 12. The build pile is cleared off, and players start again if they can. If they cannot play a card, that player discards a card, and their opponent goes. There are other similar rules involved.

A player can play with up to 3 computer opponents. They may also change their skill level. The Vario 340 is designed for use by individuals who are blind or have low vision. The Vario 340 is a 40-cell braille display for computer users for use with computers at home, work, or school. Like other BAUM braille displays, Vario 340 is a Human Interface Device (HID), which means a driver does not need to be installed to use it. Vario 340 features a reversible USB Type C port, which means it doesn't matter which direction the USB plug is facing. To use, the user will connect the supplied USB Type C cable to a Windows PC. No device drive is needed. Vario 340 automatically detects the operating system, and can be used in conjunction with COBRA screen reading software from BAUM, or with JAWS.

Unlike micro or mini USB connectors, the Type C USB port means not worrying about which direction the USB connector is facing. The DermaTherapy® Twin Sheet Set are designed to help users with eczema, psoriasis, and atopic dermatitis. DermaTherapy bedding is made with reinforced elastic corners to hold the fitted sheet in place and allows it to conform to any type of mattress – including a mattress on an adjustable bed. The Derma sheets and pillowcases may be machine washed and dried on low to medium heat. It is recommended to wash sheets and pillow cases before use. Do not use fabric softener or a dryer sheet as this may block the wicking properties. If bleach is needed, only use non-chlorine bleach. Do not dry clean. Voice Recognition Memo Book is a small keychained memo book for people with memory problems to use for recording reminders, memos, and lists.

It has four directories/folders which are labeled (recorded) by the owner for a total of 60 subject/names in the directories/folders (15 for each directory.) Each subject within a directory/folder has 12 seconds of recording time. Each directory/folder may be reviewed by pressing the browse button, and then easily chosen by the select button, so a 12-second voice recording for each subject name yields 12 minutes of total recording time.

It is operated on a CR2032 battery. The delete button is placed on the back of the disk so to not press the button accidently. It fits in a pocket or hooks onto a keychain via a carabineer hook. To wake up the unit, its user would press the large button in the center of the disk-shaped recorder. The Moshi Elite Massaging Neck Pillow is a soft, plush, wraparound neck pillow with a built-in reading light and massager designed as therapy for people with pain in their neck due to arthritis or other conditions. With the Moshi Elite Massaging Neck Pillow, a user can read in low-light conditions and receive a soothing, relaxing neck massage at the same time.

The neck massager has two speeds with more or less pressure. A button closure keeps the pillow firmly around the user's neck so it never slips off. The new Olympus DM-720 is a digital voice recorder that uses Voice Guidance (that can be activated or set to inactive) to speak to the user as they navigate its functions including set up, folder organization, and menu navigation. It also has an Intelligent Auto Mode function which will allow the recorder to adjust microphone sensitivity depending on the volume of the sound or speaker that is being recorded. Features 4GB of internal NAND flash memory and a microSD or micro SDHC card slot that will take 2GB to 32GB of additional memory. MicroSD cards are sold locally separately. The Olympus DM-720 has a stereo directional condenser microphone and a center omni-directional microphone giving the user the ability to capture lower bass ranges with stunning clarity. With 985 hours of recording time, the user can use the recorder to capture notes, lectures, and much more without running out of memory.

Record and play back in two of the standard high-function formats: PCM(WAV) and MP3. This digital recorder has 985 hours of record time at its lowest mono setting, 123 hours of record time at a higher mono setting, and 61 hours of recording at the highest quality stereo recording. It also has a USB Direct pop-out plug for connecting instantly to your Personal Computer (as pictured in our Zoom + image above) for download or to upload and manage files saved within this digital recorder. The CAN-DO Improved 4 Track Cassette Player is an Independent Living Aid 4 Track player/recorder featuring a sleep switch that stops the tape at the spot where the user falls asleep. It is designed for recreational use by blind low vision individuals. The unit plays both 2 and 4 track cassettes and records 2 track cassettes.

The user can listen to it with or without the included headphones. Volume can be controlled using either the knob on the unit or one located on the headphone accessory.

Operates on 2 AA batteries (not included). Other features are variable speed, tone indexing, a belt clip and easily identifiable buttons. The 3X Laptop Screen Magnifier Filter for 14' Widescreens is a computer screen magnifier designed for a laptop to be used by people who have low vision. The 3X magnifier results in 30% larger images. Features include: • Reduces glare to avoid eyestrain and fatigue • Anti-reflection with UV Ray blockage • Enhanced visibility of the display without distortion • Portable, lightweight, and easy to attach to notebook • Can be held over a page to magnify the text • Modern style plastic hooks on each size to hang directly on notebook. The Long-Handle Magnet Sweep is designed to help users pick up nails or metal debris without bending or stooping down. This tool can be used by any user who has difficulty picking up items from the ground, such as mobility or lower extremity impairments. A pull-handle release allows the worker to drop collected material into a bin without reaching down.

Workers with hand impairments can pick up small metal objects and drop them as needed without pinching with their fingers. Can be beneficial to users with common conditions such as: Arthritis, Back Injury, Balance / Core Stability, Fused Vertebrae, Hand Injury, Lower Extremity Impairments, Lumbar/Low Back Pain, Mobility Impairment, Multiple Sclerosis (MS), Muscular Dystrophy, Neuropathy, Obesity, Old-Age, Paraplegia, Prosthetic Limb, Replaced Joints (Arthroplasty), Stroke, Traumatic Brain Injury (TBI), Visual Impairment, Vertigo, Rheumatoid Arthritis,Degenerative Joint Disease.

The BrailleBox is designed for blind and low vision users to help them learn and practice Braille. It is a board with 12 wooden pegs (each peg represents one of the dots in a regular jumbo Braille cell) and 12 holes which allow one to create jumbo braille characters allowing for children and adults to learn braille. Users insert the pegs into the holes to create 2 separate Braille characters to feel and learn. The board and pegs tuck neatly into wooden storage drawer. The BrailleBox is less than 2 inches thick and the size of a 3 inch by 5-inch index card. This product is designed to enhance the process of learning Braille letters, numbers, and contractions. The ReadDesk is a scanning, reading, and magnifying device designed for users with low vision for making reading easy and accessible. It has instant text to speech capabilities as well.

The ReadDesk can scan, read, magnify, save, and listen to any printed material in a natural sounding voice. Users need to install the software, connect the camera to a laptop or desktop computer using the USB cable and will be ready to use. ReadDesk captures, magnifies, and reads entire pages from books, newspapers, labels, bill, etc. The Natural Sounding Voice is customizable through the menu. Users can customize the font, text color, speech, and other settings. It has the capability to convert printed text into PDF or MP3 files, offering easy access anytime. The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair.

The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into the driver or front passenger position. The 6-way seat allows the user to be able to also go up and down which allows an individual to position the seat lower than their wheelchair when transferring into the seat and then higher than their wheelchair when they are transferring out of their seat. Model L41, or Leadership 41, is a 6-Way Transfer Seat Base designed for full-size, non-lowered floor vans. The specific applications include the Ford “E” Series, Chevy/GMC full-size vans and Dodge Ram vans. The L41 is designed to mount over the airbag sensor located under the driver seat in many of these vehicles.

Features include: • Designed for Full-Size (NonLowered Floor Vans) 1996 to present • 6-Way Transfer Seat Base • Driver position only • Utilizes OEM seat • OEM seat functions are maintained • Transfer Seat Base mounts to the OEM floor mounting holes • No drilling required on most applications • Mounts over the airbag sensor. The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair.

The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into the driver or front passenger position. The 6-way seat allows the user to be able to also go up and down which allows an individual to position the seat lower than their wheelchair when transferring into the seat and then higher than their wheelchair when they are transferring out of their seat. Model CS61D is designed for driver side installations in full-size vans with a lowered floor. Features include: • 6-Way Transfer Seat Base • Driver Seat Position • Utilizes OEM seat • OEM seat functions are maintained • 2nd-row seating area remains open • Passive Interlock System provides safety during vehicle operation while providing limited adjustments to improve driving comfort • Adjustable rotation speed • Choice of side mounted switch box or coiled cord handheld pendant.

The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into the driver or front passenger position. The 6-way seat allows the user to be able to also go up and down which allows an individual to position the seat lower than their wheelchair when transferring into the seat and then higher than their wheelchair when they are transferring out of their seat.

Model L71, or Leadership 71, is a 6-Way Transfer Seat Base used primarily for older converted and non-converted full-size vans. Available in both driver and passenger position, the L71 is very customizable.

The 6-Way Transfer Seat Base moves forward and back, raises up and down, and swivels. Autism Spectrum Disorders and AAC is a book written to help children, adolescents, and adults with autism spectrum disorders and to give them in-depth information on a wide range of evidence-based AAC methods and technologies. The book talks about the tremendous positive impact on communication, social skills, and behavior augmentative and alternative communication (AAC) can have. Editors Pat Mirenda and Teresa Iacono partner with more than 30 other experts, including the Institute on Disability's own Michael McSheehan, Rae Sonnenmeier, and Cheryl Jorgensen, Through clear and compelling examinations of research studies, professionals discover how these AAC interventions can be used to promote children's natural speech and language development, expand literacy skills, modify challenging behavior, build children's social interaction skills, and help adolescents and adults develop strong social networks within their community.

Essential for SLPs, OTs, PTs, educators, and other direct service providers, this book gives readers a complete understanding of the diverse AAC options- knowledge they can use to help people with autism spectrum disorders develop the communication and social skills they need to succeed. Assistive Technology Solutions in Minutes II: Ordinary Items, Extraordinary Solutions is a book filled with five-minute, low-cost approaches for taking ordinary items and turning them into extraordinary solutions for individuals with disabilities. Picking up where the first book left off, AT Solutions in Minutes II demonstrates creative DIY problem solving without the need for power tools or electricity, empowering everyone to be spontaneous and create solutions to everyday challenges using everyday materials. This full-color text contains over 750 photographs with step-by-step fabrication instructions. Every solution can be made using simple and readily-available tools like a utility knife, pliers, scissors, a wire stripper, and a mini blowtorch, among others.

The book also comes with a DVD featuring 115 'how-to' video clips and printable PDF “recipe” sheets for easy sharing. The DVD also contains an accessible copy of the book with picture descriptions for individuals who experience visual impairments. Inclusion in the Early Childhood Classroom is a book written to coach teachers of young children with a variety of developmental delays and disabilities on how to care for them and teach them in a classroom setting. The authors evaluate the ways that teachers and children respond in real classrooms to real challenges, examining both those opportunities that are capitalized on as well as those that are missed. The book addresses a wide array of issues that contribute to our understanding of 'what makes a difference' in the inclusive early childhood classroom: the role of development, ways of honoring different learning styles, building a sense of classroom community, addressing power dynamics, and responding to conflict with both teachers and peers. This resource introduces a framework that will inspire early childhood teachers to reflect on their own practices and take action to develop new strategies for teaching in inclusive classrooms.

The Stoplight Golight Timer is designed for both individuals with hearing or cognitive impairments to help manage time. It can be used for children as young as two. Red light means stop and complete task, green light means time is up, and it’s time to go. Users will set the desired amount of time and press Start. The red light illuminates and time counts down. When time is up, red light off, green light on. This can be used to manage bed times, wake time, nap times, brushing your teeth, timeouts, reading times, practicing an instruments, getting ready for school, video game/computer time and TV time.

• Utilizes OEM seat. • Mounts to the OEM floor mounting holes. • Protective bellows to conceal the scissor legs. • Both handheld pendant and side mounted switchbox. The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into the driver or front passenger position.

Features include: • 6-Way Transfer Seat Base • Driver or Passenger position • Utilizes OEM seat • Mounts to the OEM floor mounting holes • Protective Bellows to conceal scissor legs (Standard) • Both handheld pendant and side mounted switchbox. The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into the driver or front passenger position.

The 6-way seat allows the user to be able to also go up and down which allows an individual to position the seat lower than their wheelchair when transferring into the seat and then higher than their wheelchair when they are transferring out of their seat. The Sprinter Transfer Seat Base is a 6-Way Transfer Seat Base that is available for both the driver and front passenger positions of the Dodge Sprinter. The Transfer Seat Base comes with a modified pedestal that is half the height of the original OEM pedestal, allowing plenty of room for a B & D Transfer Seat Base while housing all the electrical components under the seat. Pedal Wheelchair is a wheelchair designed for individuals who are in stroke recovery, have a diagnosis of Parkinson's, cerebral palsy, multiple sclerosis, osteoarthritis and/or joint pain (knee, hip, ankle, foot, etc.), single-leg disabilities/ amputees, head trauma, and diabetics. It can also be used by elderly individuals or those with special needs who might benefit from increased physical activity or leg-strengthening exercise.

Originally designed as a mobile therapy rehabilitation training tool for stroke patients, the Pedal Wheelchair was created as a way for stroke patients to train their afflicted weaker leg by exercising the healthy leg. The Pedal Wheelchair helps improve muscular and cardio-respiratory health, increase mobility and restore independence. Articulation Scenes is a app for children to practice their articulation skills. Articulation Scenes offers children the opportunity to learn to pronounce their sounds from pre-recorded audio built-in on each activity as well as the ability to record their own voice pronouncing the words. It comes with 72 built-in scenes and over 1200 practice words.

Each scene contains 4 separate activities: • Find the hidden items: Allows children the opportunities to listen to targeted words and find them on each scene. • Tap and say it: Children tap on the items on the scene, which are isolated allowing the therapist to track and monitor their productions. • The movie theater: Children get the opportunity to listen to a story using the target words. • The production room: This is the activity that allows children to either create their own stories, record them and continue to practice. Articulation Scenes includes all consonants in the English language: [ p, m, h, w, n, b, d, y, t, k, g, ng, f, ch, j, l, r, v, s, z, sh, th] One scene per sound per position is included. Additionally, for children who need practice with one of the most targeted phonemes in speech therapy sessions /r/, one scene per each separate type of the sound “r”: [ pre-vocalic, blends, air, ar, ear, ire, or, rl ] is included.

The CanDo Twist-n-Bend Exerciser is a lightweight, portable exerciser designed to strengthen muscles in the hand, wrist and shoulder. Also promotes coordination and increases range-of-motion. The bar allows for twisting and bending therapy motions. Perform oscillation movements for neuromuscular and balance training. Use for soft tissue and joint mobilization.

The 12 inch long rubber bar is licensed to use the same graduated progressive color code as Thera-Band Sequence products. Levels range in order of strength from least to greatest resistance: tan, yellow, red, green, blue, black, silver, gold. OPTIONS: Resistance options. SIZES: One size. DIMENSIONS: All exercisers are 12 inches long.

COLOR: tan, yellow, red, green, blue, black, silver or gold. WARRANTY/GUARANTEE: As stated by the manufacturer.

The Rickshaw Rehab Exerciser, model 3000, is an exercise machine designed for use by individuals who use manual wheelchairs. This machine builds muscle strength by duplicating the arm and shoulder motions needed for wheelchair propulsion, transfer, and pressure relief. It enables users to strengthen specific arm and shoulder muscles by facing forward or backward while seated in the wheelchair, and pumping weighted oars. The machine can be customized for an individual program by using equal weights on both sides or less weight on a weaker side. The machine uses standard disc weights (not included).

Its short zigzag oars pivot independently or together, have an adjustable oar grip height, and use little floor space. The machine has all stainless steel construction and fits all manual wheelchairs. Weight capacity per oar is 100 pounds. DIMENSIONS (HxLxW): 28 or 32 x 50 x 30 (inside width) or 36 (outside width) inches. The arm length is 26 inches.

CAPACITY: 100 pounds per side. WEIGHT: 37.5 pounds.

The Thera-P Bar is a barbell designed for use in therapeutic upper body exercise by individuals with physical disabilities. Weights are graduated to increase resistance as the user's strength increases.

No assembly is required. The bars are color-coded by weight and have non-slip handles. Barbells may be purchased separately or in a five-barbell set with weights from one to five pounds. OPTIONS: Nylon carrying case (holds up to five weights), storage cart (holds up to 16 weights; see entry), wall rack (holds up to 16 weights; see entry), and floor stand (holds up to 12 weights; see entry). DIMENSIONS (DxL): 1.25 x 29 inches for 1 to 7 pound weights and 1.25 x 39 inches for 8 to 10 pound weights. WEIGHT: Whole-pounds increments from 1 to 10 pounds, plus 1.5, 2.5, 3.5, and 4.5 pounds.

COLOR: Whole-pound weights are yellow (1 pound), orange (2 pounds), red (3 pounds), green (4 pounds), blue (5 pounds), aqua (6 pounds), forest (7 pounds), purple (8 pounds), magenta (9 pounds), black (10 pounds). Half-pound weights have yellow, orange, red, or green stripes. The Colorado Sport Cycle is a bicycle arm or leg exerciser designed for use by individuals with upper and/or lower extremity disabilities. This adjustable, stationary exercise cycle is placed on a table and used with hand grips for upper extremity exercise.

The unit can also be placed on the floor and used with the optional foot pedals for lower extremity exercise. The unit provides a choice of forward or bi-directional resistance.

Standard features include lever-controlled resistance adjustment; an electronic digital display of elapsed time, speed, and distance; QuickExchange standard handgrips; a padded, adjustable forehead rest; nylon strap resistance; a 20-pound solid front flywheel; non-slip rubber pods for stability; mobility casters for portability; a safety chainguard which encloses moving gears and sprockets; and a hand-adjustable table clamp. OPTIONS: QuickExchange limited grasp grips; QuickExchange adjustable loop grips; QuickExchange 2- or 3-way angled grips; grip cuffs; foot plates with ankle/toe straps; chest strap, crank-arms; high top boots; adjustable-height cycle table. WARRANTY: One year warranty on materials and workmanship. The Spirit 630 Arm Cycle is an arm exerciser designed for use by individuals with upper extremity disabilities. This freestanding arm cycle is equipped with an open wheelchair- accessible base and handgrips. Features include an 18-pound iron internal flywheel; adjustable cycle-to-floor angle; variable resistance; QuickExchange standard handgrips; foot plates with ankle/toe straps; mobility casters; and an electronic digital display of speed, pedal revolutions per minute, total pedal revolutions, distance traveled, distance up, distance down, elapsed time, remaining time, time up, time down, calories burned, autoscan, pulse monitor (ear-clip), and beeping pedal rate.

OPTIONS: QuickExchange limited grasp grips, adjustable loop grips, or 2- or 3-way angled grips; forehead rest; grip cuffs; crankarm. DIMENSIONS (LxW): 35 x 32 inches, including clearance for the front edge of the flywheel, and excluding the width of the handgrips. WARRANTY: One year warranty on materials and workmanship. The Uppertone Gym is a weight exercise machine specifically designed for use by individuals who are quadriplegics. All excercises and adjustments can be done without hand grip strength; no cuffs are required. This multi-station machine targets major upper-body groups.

DELTOID PRESS: This station works the shoulders and lower neck region. Resistance adjustments are made by spinning the weights to new positions. Adjustable for height and arm width. LAT PULLS: Exercises at this station work the upper chest and back muscles (pects and lats). ROWING & CHEST PRESS: Pulling padded handles that simulate a rowing action provides aerobic exercise and works the biceps, shoulders and back.

The chest press is acheived by turning around and pushing the levers instead of pulling. BICEP CURL & SHOULDER ROTATION: This station will work one arm at a time. It was designed to stretch out the arm in a position which will cause the full range of the curl to isolate the bicep group.WEIGHTS INCLUDED: The Uppertone exercise machine comes with the maximum available weight of 40 pounds on the rowing station and 30 pounds on the curl station.

Threaded disks are provided for the deltoid station, which has a capacity of 40 lbs. OPTIONS: Additional weights available include the 10-pound threaded weight disk and the 5-pound threaded weight disk. DIMENSIONS (LxWxH): Frame dimensions are 46 x 46 x 72 inches; overall dimensions are 75 x 56 x 74 inches. GUARANTEE: Manufacturer guarantees parts and labor for one year. The Exercise Unit, model NK 45, is an exercise machine designed for use in exercising the lower extremities. The unit is useful for resistive exercise programs for the knee, particularly the quadriceps and hamstring muscles. The unit consists of an electric welded steel frame with the top covered by naugahyde over foam padding.

The chrome torque unit has an easy-to-read range of motion indicator, padded adjustable leg rest and stationary weight holder with securing cuff in addition to a pull pin device which operates the changing of the resistive arm angle. The torque unit can be placed on either the right or left side, or an additional torque unit (NK 401) can be added for reciprocal exercising.

CAPACITY: Torque unit has a 75 pound weight capacity. DIMENSIONS: Overall floor size is 48 x 30 inches. WEIGHT: 60 pounds. The Bluetooth/MP3 Audio Center is designed for users with augmentative and alternative communication disabilities to provide auditory stimulation, allowing users to develop music appreciation. The audio center features five large switches to control on/off, volume up, volume down, track back/forward, pause/play, and mode change. The Bluetooth and MP3 Audio Center features a headphone jack and Micro SD card slot, and works with any Bluetooth enabled device. Additional features include: Microphone for receiving phone calls, headphone jack, built-in Micro SD card slot for playing save audio, premium quality audio with super bass and 3 watts speaker output, rechargeable battery lasts up to 5 hours and charges via USB.

The Withings Home is a home monitoring device designed for parents of children with severe physical disabilities to feel more secure when leaving their child at home and overall to reduce anxiety. Withings Home has the ability to stream HD video and facilitate family interactions. The wood cover turns to stop recording.

Features include: • Air Quality Sensor of Volatile Organic Compounds • HQ 2-Way Audio • 2W Speaker • 2 Digital Microphones • 5 Megapixel lens up to 1080p • Advanced Night Vision • 135° Wide Angle. The Reizen Loud Ear 110dB Gain Personal Amplifier for the hearing impaired is a powerful personal amplifier with a built-in microphone, designed for people with hearing disabilities to use. It has a personal amplifier with 110dB gain and built-in microphone for clear and loud hearing. Voice and sound comes through mini earphone. It picks up sound at a distance of up to 100 feet away. Built-in belt clip allows user to attach it to their belt or clothing. Additional earphones are available to use as spares or replacements.

The Audio Fox Undercover Wireless TV Speakers are assistive technology devices for the deaf and hard-of-hearing that will allow them to hear a television. The new Audio Fox Undercover Wireless TV Speaker System gives personal control over the TV volume without the use of headphones. The stereo speakers are encased in cushioned fabric (either black, brown, or tan) that blend with most furniture decor. The speakers drape over the back of a chair, providing sound directly to ears.

A remote control will change or mute the volume for the user, while others in the room can listen to the normal TV volume. The fabric cover is not removable but can be spot-cleaned with a damp cloth and detergent.

This Autism & Beyond App is a functional application intended for use by doctors and parents of children or adults with mild to severe brain injury, post traumatic stress disorder, autism spectrum disorder, or other emotional disorders. The app allows doctors at Duke University Health System, Inc. To test new video technology that can analyze a child’s emotion and behavior. The Autism and Beyond application, using an iPhone self-facing camera, assess child emotional state while viewing various stimuli. The app will help doctors learn about all children and families; create new screening tools for autism and challenging behaviors and emotions, like tantrums and anxiety; support children’s healthy development; and gain a better understanding of what parents need. When users join the study through the app, they will have the option to send video recordings to Duke to help improve their technology, or the user may choose to send just a data file with no video recordings. The Autism Discovery Tool: Sensory from Within is a mobile application for children ages 6 to 8 that aims to improve sensory environments for people on the autism spectrum disorder by empowering people in their home, school, and community settings to better understand and communicate about the autism spectrum.

This exploratory, play-based app immerses users into sensory experiences that raise awareness of how others may interpret their environment differently. The app is broken down into the seven senses, which include vision, hearing, touch, taste, smell, balance, and body position. Each sense uses common scenarios, such as sitting in a classroom, playing mini-putt, making a smoothie, or playing in a park, to demonstrate some of the sensory diversity found on the spectrum, including both strengths and challenges. Additionally, hidden tools can be discovered in each of the scenarios, providing useful sensory strategies that can be applied in the real world. This app enables a wide range of ages, abilities, and communication styles to better understand the spectrum and gain the tools, strategies, and understanding that are necessary in the development of better environments for those on the autism spectrum. The Hydraulic Top Link - 3pt is a tool designed for farmers that will allow them hitch a three-point implement from their tractor by pushing a lever. Users with mobility or arm impairments can use a hydraulic top link to hitch three-point implements from his tractor seat by pushing a lever.

The top link tilts a quick hitch so the top hook can engage the implement first, then as the top link retracts the side pins are pulled into place and latch. A standard top link is a screw jack and must be manually adjusted to control this tilt. With the Hydraulic Top Link - 3pt, users with arthritis in the knees would find relief from not having to climb in and out of the tractor cab to adjust the top link length while hitching 3-point implements. Options: 2 Categories Category 1: • All ports:.563'-18 ORB w/ two adapters.563'-18 ORBM X.250' NPTM 90 swivel • Replaces: Gannon 13-650 • Stroke Length: 8 inches • Closed Length: 20 inches • Barrell Length: 12.438 inches • Rod End Ball I.D.:.750 inches • Rod End Ball Width: 1.750 inches • Base End Ball I.D.:.750 inches • Base End Ball Width: 1.375 inches • Base to Ball Ctr Length. 3.500 inches Category 2: • All ports.563 inches-18 orb w/ two adapters.563 inches-18 ORBM X.250 NPTM 90 swivel.

• Replaces: Gannon 13-827 • Stroke Length: 8 inches. • Closed Length: 26 inches • Barrell Length: 12.438 inches • Rod End Ball I.D.: 1 inch • Rod End Ball Width: 1.750 inches • Base to Ball Ctr Length 5.500 inches • Dim G (7): 1450.377 PSI. The KneeRover All Terrain Steerable Knee Walker Knee Scooter is a mobility device designed for use by individuals recovering from injury or surgery to the foot, ankle or lower leg, as well as below the knee amputees to use as a means of transportation. The KneeRover is an alternative to crutches. This Indoor - Outdoor All Terrain knee scooter features 12-inch pneumatic tires and the setup is tool free.

It accommodates patient heights 5 feet – 6 feet and has 5-inch, 12-inch air-filled tires. Adjustable brake with parking/locking feature. The mobility device's dual crossbar design allows for smoother braking. Compatible for left and right legs. Dimensions: • 7.5 inches Length x 12.5 inches Width x 8.25 inches Height Wire Basket is included for storage and transport of any personal belongings. • Knee pad dimensions: 6.75″ wide x 12.5 inches length. Materials: • Knee Rest: Contoured Molded Foam.

• Handlebars: Comfort Form; Easy Clean Rubber. Color: Blue Measurements: • Overall Length: 35.5 inches. • Overall Height w/ handlebar in lowest position: 34 inches.

• Overall Height w/ handlebar in highest position: 46 inches. • Overall Height w/ handlebar folded and seat removed: 19 inches.

• Handlebar Adjusted Height Range: 35 inches – 47 inches. • 3-inch Contoured Knee Support Adjusted Height Range: 19 inches – 22.5 inches.

• Front Axle Width: 21 inches. • Front Axle Width: 21 inches. Weight: • Product Weight: 27 pounds. • Shipped weight: 34 pounds. • Capacity: 400 pounds.

KneeRover Kids Knee Walker Child Knee Scooter Pediatric is a pediatric steerable knee scooter designed specifically for children and small adults who are recovering from a broken foot, broken ankle, broken leg, foot surgery, ankle surgery or other lower leg injuries or medical conditions, like ulcers, to be a means of transportation. It provides stability and safety with its sturdy design, unique 4-wheel frame, adjustable handbrake, and rear disc brake. Designed to be an alternative to crutches, the Kneerover Knee Walker is compatible with both the right and left legs and offers a 3-inch thick contoured knee platform and ergonomic rubber hand grips for comfort. The knee walkers are equipped with a detachable storage basket and feature tool-free assembly and setup. The Knee Walker Jr. Steerable Knee Scooter for Kids is the first pediatric steerable knee scooter designed specifically for children and small adults 3 foot 6 inches - 5 foot 4 inches and under 160 pounds, who cannot bear weight on their foot or ankle, yet want to remain active and mobile.

The Knee Walker Jr. Provides stability and safety with its sturdy dual bar design, unique 4-wheel frame, adjustable hand brake, and rear disc brake. Compatible with both the right and left legs, this kneeling scooter offers a 3-inch thick contoured knee platform and ergonomic rubber hand grips for complete comfort.

Additionally, these knee walkers are equipped with a free detachable storage basket and feature tool-free assembly & setup. Weight: • Product Weight: 18 pounds. • Weight without carton: 18 pounds. • Weight with carton: 22 pounds. Capacity: • Weight Capacity: 160 pounds. • Patient Height Range: 3 feet, 6 inches to 5 feet, 4 inches.

Dimensions: • Wire Basket: 7.5 inches x 5 inches x 5 inches. • Tire Dimensions: 5.75 inches x 1.25 inches Foam Filled Tires.

• Knee Platform Dimensions: 10 inches Length x 5 inches Width x 3 inches Height. • Box Dimensions: 17 inches Length x 14 inches Width x 27 inches Height. • Basket Dimensions: 7.5 inches Length x 5 inches Width x 5 inches Height. • Folded Dimensions: 26 inches Length x 16 inches Width x 13.25 inches Height. Materials: Grips: Ergo Dynamic Easy Clean Rubber.

Measurements: • Knee Walker Platform Lowest: 14 inches. • Knee Walker Platform highest: 17.5 inches. • Handle Bar Height Lowest: 27 inches.

• Handle Bar Height Highest: 32.5 inches. • Overall Length: 26 inches.

• Overall Width: 16 inches. The KneeRover Jr. All Terrain Steerable Knee Walker is a steerable all terrain knee walker designed specifically for children and small results in recovering from injury or surgery to the foot, ankle, or lower leg as well as below the knee amputees to be used as a means of transportation.

For storage and portability, it has easy fold capability, adjustable rim hand brake, dual crossbar design for durability, rear brake, padded contoured comfortable knee platform with easy folding mechanism, and left and right leg compatibility. Accommodates patient heights 4 feet to 5 feet, 9 inches in height. Other features include: • Ergo dynamic easy clean rubber grips • 10-inch pneumatic tires for navigating around the home, workplace, and any terrain with ease (including grass, gravel, dirt and gaps in sidewalks) • Fully adjustable knee platform and handle bars with a folding mechanism for transport and storage of rolling knee walker • Advanced automotive style tie-rod steering mechanism and an adjustable hand brake.

• Double bar construction offers strength and stability. Materials: • Knee Rest: Contoured Molded Foam. • Handlebars: Comfort Form 7/8-inch Steel. Dimensions: • Wire basket: 7.5 inches x 5 inches x 5 inches. • Knee Platform Dimensions: 10 inches Length x 5 inches Width x 2.5 inches Height. • Folded Dimensions: 30 inches Length x 20 inches Width x 16 inches Height.

• Tire Dimensions: 10 inch x 2.25 inch Air Filled with Articulated Valve. • Box Dimensions: 23 inches Length x 17 inches Width x 32 inches Height.

Measurements: • Knee Walker Platform Lowest: 16 inches. • Knee Walker Platform highest: 19.5 inches. • Handle Bar Height Lowest: 32 inches. • Handle Bar Height Highest: 38 inches. • Overall Length: 30 inches. • Overall Width: 20 inches. • 2.5-inch Height Knee Rest.

Capacity: • Weight Capacity: 250 pounds. • Patient Height Range: 4 feet – 5 feet, 9 inches. Weight: • Weight without carton: 24 pounds. • Weight with carton: 30 pounds. The Nipro TRUEtrack Smart System Blood Glucose Monitoring System is a blood glucose analyzer designed for use by adults and children with diabetes. This blood glucose meter produces results come in only 10 seconds. Features include: • Two-step operation.

• Approved for alternate site forearm or fingertip testing. • Capillary action requires only one microliter of blood for more comfortable testing. • 365 test memory with date and time display. • Automatic coding with code chip. • 14- and 30-day averaging. • Data port for internet upload. The RipChair is an extreme off-road tracked wheelchair designed for outdoorsmen, farmers, landscape designers and others with mobility impairments such as stroke, paralysis, amputation or multiple sclerosis can use this wheelchair to access their jobsites, quote new jobs and manage workers in the field.

It accepts most power chairs and self powered wheel chairs. Features include: • 29 Horsepower 4 Stroke engine • Hydrostatic Drive with Electric Controls • Emergency Safety Override and Alarm/Alert Tone • Customizable Colors • Top Speeds up to 17 miles per hour (Factory set at 10 Miles per hour) • Four-way Swept Dogleg Suspension • Fire Extinguisher • Reflective Ripchair 3.0 Front Bumper Logo. Options: The Ripchair Off Road Chair now features two new options: The first is an all new ramp design, allowing the user to back into the Ripchair using their own wheelchair that is locked into place, allowing the user the option of exiting the vehicle to have a quiet lunch by the riverside or on a mountain top. The second option is a built in seat that extends out and down for ease of access. Material: Aerospace Grade Aluminum. Construction Grade Hydraulics and Tracks.

Dimensions: Fixed Chair or Ramp Design: 72 inches Length x 60 inches Width x 72 inches Height. Measurements: Ground Clearance: 10 feet. 60 Percent Climb Rate. Weight: 1,200 pounds. 1,000-pound Draw Bar Pull. Standard Package Options: • Cup Holder • Hunting Rifle/Fishing Rod Holder • Cargo Components • Customizable Controls, i.e., Thumb Controls (Joystick), Lever Control (Similar to a Zero Turn Lawn Mower) •Class 2 Receiver •2- 4000 Lumen Front and Rear Lights Additional Package Options: • 4 D-Rings- Tow Point Front and Rear • 5'-6' Snow Plow • 5000 lb Winch • Equalizer Shooting System by Jeff Malloy • Fishing System by Ken's Power Caster • Custom Cargo Componets. Speak for Yourself is an Augmentative and Alternative Communication (AAC) application designed with motor learning principles for people with communication disabilities. It uses a word-based form of vocabulary of the most frequently used words in communication and contains features important in developing automaticity and language.

Individuals learn to use their communication device with the same principles they use to play an instrument or type on a keyboard. Speak for Yourself has the capability to start with one word, but contains almost 11,000 Smarty Symbols® and allows the user the potential to access almost 14,000 words, with no more than two touches to say a word. Complex page navigation and scanning are eliminated to allow fast, consistent access to language!

Powered by CereProc's speech system to give our voices character, emotion, and personality. Users can choose to include voice options from Acapela Text-To-Speech from Acapela Group through in-app purchasing.

The Adjustable Folding Support Cane f-t Blind 33-37-in is a cane designed for blind people to navigate securely and maintain an active lifestyle. The cane has a 4-section anodized aluminum shaft and rubber tip that comes mounted on its base, bright white upper sections with a red bottom section, and a comfortable contour grip with wrist strap.

It adjusts in one-inch increments. This aluminum support cane helps its user maintain balance as they walk. The elastic cord is threaded through the center of its shaft. Folding sections snap out easily and automatically. Includes elastic wrist strap. Stepping Stones is an application designed for children and adults who benefit from visual support, including those with developmental disabilities such as Autism, attention or auditory processing deficits, learning disabilities, or anxiety to help users create visual guides, or ‘paths,’ using their own photos. This app can help users make sense of daily routines and schedules or stories.

The visual supports help increase the independence and flexibility that people with developmental disabilities can experience in their lives, as well as teaching essential life skills and assisting with sequential processing. A 12-1/2 milliliter applicator designed to maximize user comfort. Dial-a-dose system for easy dose settings (1 to 12-1/2 milliliter in 1/2 milliliter increments).

Handle spring covers for greater hygiene. Dual-size hose barb for either vaccine or drenching draw off tubes.

Simple cleaning and relubricating process. NRG (needle release grip) cap allows simple attachment and release of needles with greater durability. Lightweight, compact, and durable. Soft-grip handle. 42 inch hose.

Farmer’s kit comes with 12.5 optimiser™ syringe with NRG Cap, one metal drench nozzle, one plastic drench nozzle, one plastic T-bar pour-on nozzle, tubing, and two needles. The Pulley Block is designed for individuals with paraplegia or upper extremity disabilities or back pain to help them lift heavy items without straining their back. This can be used to lift heavy objects without straining the users back. It is rated for lifting 2000 pounds, requiring a 400-lb pulling force, meaning that if a user needs to lift a 55-pounds this pulley block would reduce the load to only 11 pounds. When used with a hand-cranked winch this pulley hoist can position and hold heavy loads with precision and little physical effort. The Yard Cart is a wagon designed for workers to carry heavy loads around a farm, yard, or worksite without straining their back and shoulders while lifting them up into the bed of a pickup truck or ATV. The deck of the wagons are much lower to the ground instead of 36 inches like an ATV or utility vehicle.

Users can load materials onto a wagon and then pulled to the destination with much less effort than carrying. This can be useful for users with conditions such as back pain, cerebral palsy (CP), diabetes/diabetic neuropathy, fused vertebrae, herniated disc, hip pain, knee pain, leg amputation, lower extremity impairments, lumbar/low back pain, mobility impairment, obesity, old-age, rReplaced joints (arthroplasty), rotator cuff injury, ruptured disc, scoliosis-kyphosis-lordosis, shoulder replacement, slipped disc, osteoarthritis. The Cord Reel is designed to assist workers with arm, balance, and mobility impairments by making it easier to roll up hoses and keep the floor clear to reduce tripping. Workers with common conditions such as these would benefit from this Cord Reel: arm amputation, arthritis, balance/core stability, Cerebral Palsy, (CP), diabetes/diabetic neuropathy, hand injury, total hip replacement, total knee replacement, leg amputation, lower extremity impairments, mobility impairment, multiple sclerosis (MS), suscular dystrophy, old-age, paraplegia, prosthetic limb, quadriplegia, rotator cuff injury, shoulder replacement, degenerative joint disease.

• 40 foot 12/3 SJT, 15 Amp cord retracts into an impact-resistant polypropylene plastic case for tangle free winding and protection during storage • Mounts on wall or ceiling and swivels 180° for easy access • For use in temperatures less than 60°C (140°F) • Retractable cord keeps work area neat and supply connectors at the necessary working length • Impact-resistant polypropylene plastic case for years of durability • Adjustable cord stop to set the cord in your desired position • Manufacturer Warranty 12 months parts/12 months labor. The Tow Behind Tiller is a work tool designed for workers with back, arm, neck, hand, and strength disabilities, to help them till gardens or small fields without walking on rough ground, lifting the tiller to turn at corners or suffer from the vibrations of the handles on a walk-behind tiller. A Tow Behind Tiller has its own power supply so it can be hitched to an ATV or garden tractor to till gardens. Includes 6 tines, Briggs & Stratton engine, forward rotation tiller, and spring loaded hitch to reduce stress. There is no sleeve or three-point hitch necessary. The 6 heavy-duty double edged, 11-inch diameter tines make quick work of tough and compacted soil. Tines adjust from 1 1/2 inches to 5 1/2 inches in height. This can be used by individuals with common conditions such as: arm amputation, back pain, hand injury, total hip replacement, total knee replacement, leg amputation, lower extremity impairments, mobility impairment, multiple sclerosis (MS), muscular dystrophy, neuropathy, paraplegia, shoulder replacement, stroke, degenerative joint disease.

The Snug Seat Crocodile Adult Reverse Walker - Size 3 is designed for users who need assistance with walking. The walker allows the user freedom of movement and facilitates walking in the upright position. The adjustable handles can be individually adapted to a position conveniently close to the user’s body providing maximum support and stability. The Crocodile can be used as a basic posterior walker for the user who needs minimal support or as a fully supported upright walker with all of the accessories added. Additional features include: • The Crocodile may be equipped with a sling seat, a fold down seat, arm prompts, pelvic supports, and anti-tips for users who need more support and positioning. • Lightweight aluminum frame.

• The large solid wheels allow children to explore most terrain. The DuraGlide bathtub transfer system is an adjustable level, glide bath/commode chair and tub transfer system. It is designed to be used by users with mobility disabilities, balance, and cognitive disabilities who have difficulty standing in a tub or shower. The transfer bench also eliminates the need for heavy lifting or awkward transfers. It fits over a standard commode for toileting. When attached to the adjustable tub rails, the seat rolls into the tub for bathing or showering.

The DuraGlide is equipped with 4 locking 5 inch casters, has swing-away arms and comes standard with a waterfall open front padded seat, safety belt and retractable footrest. The Easy-Level tub frame legs are infinitely adjustable. The Laser Pointer (Head Mounted) is designed for users with speech and mobility impairments, and users with limited movement as a way for them to communicate. The device works by enabling a person with limited movement to directly point to letters, words, and phrases on a communication board. The laser pointer uses a class 2 laser module (the lowest powered visible laser available), that is considered safe because the blink reflex will limit the exposure to no more than 0.25 seconds. The laser is mounted onto a tiny adjustable arm making it easy to adjust the beam of the laser up, down, left and right. This is important, because a person may be communicating in several different positions though out the course of the day. (If a person was using a conventional laser pointer, and tilted back in their chair, the laser beam would point at the ceiling).

Using an adjustable mount also means that the communication partner does not need to change the position of the board every time the laser user reclines or tilts back in their chair. A highly disabled (quadriplegic) person can fully control this kayak via a SIP & PUFF Switch! This design is a stand-alone fixture consisting of a Deck Plate that can be fastened to ANY kayak. Off each end of the plate is a pontoon, which rides above a fixed direction trolling motor. Each system has two pontoons and two trolling motors.

There is no need for a rudder or any mechanism to steer the trolling motors, as turning is accomplished by varying the speed of one or the other trolling motors. The Motor Control Program is entirely controlled by a single SIP & PUFF switch! The on-board Arduino Duemilanove Microcontroller puts the Motor Driver into Serial Input Control Mode and accepts Sip&Puff Switch inputs from the Rider. It then sends appropriate Serial Commands to the Motor Driver to operate the two Drive Motors. Split-second (0.1 - 0.6 seconds) Sips and Puffs control Left and Right Turning, respectively, and slightly longer (0.6 - 2.5 seconds) Sips & Puffs control REV and FWD movement. Even longer Sips and Puffs Stop the motors or command them equally to Full Speed.

Steering is accomplished via differential motor speed. Step 1: Advantages & Safety Features of the Design • No need to develop a directional control system as turning is accomplished by differential motor speed. An inexpensive single-board computer (eg. Arduino Duemilinove) drives the inputs of the motor drive circuitry. Functionality is easily modified as a S/W change. • Designed as a stand-alone assembly, it is designed for use on just about any kayak, particularly sit-on-tops. The user does not need to buy another kayak, or any at all if they can rent one.

The wing can be easily positioned in front of or behind the user. • The SIP&PUFF interface is fatigue free, and does not bring any electrical circuitry up to the user. All electrical and electronics components are contained in a (semi-)waterproof enclosure typically placed above the deck plate. Only the battery is separate, and can be positioned in front of or behind the rider. • The system incorporates an RC Remote Control override by which a safety observer can take full and precise control over the kayak in any case where the rider is unable to control it as required.

• All switches are debounced and timed in the software. Safety Features: • An RC Remote Control override capability. • A Lanyard Switch to detect the rider falling off without capsizing. • A toggle switch on the Control Unit to ensure motors off during boarding, etc. • A 'secret' system startup sequence and 'Practice Mode' to allow safe power-up. • A remotely-operated switch to electrically disconnect both motors in case of major system failure.

Step 2: The Safety Observer At any time, the Safety Observer can (turn on the RC Transmitter and) transmit a Full Throttle command which the Arduino detects via this Receiver Channel being connected directly to it. The Arduino then sends Serial commands to the Motor Driver to put it into RC Input Control Mode. The Safety Observer now has full direct control of the Motor Driver via the AILERON and ELEVATOR channels of the Receiver being connected directly to the RC Inputs of the Driver (in MIXED Mode). The kayak is now essentially a large robot.

If the Safety Observer decides to pass control back to the Rider, a Throttle Off command is Transmitted, or the transmitter is simply turned off. The Arduino detects this condition and sends Serial Input Control Mode Commands to the Motor Driver giving control of the Motor Driver back to the Rider via Sip&Puff inputs into the Arduino. Note that the Arduino controls the Motor Driver via Serial Commands Only. The Rudder Channel of the Receiver is reserved to actuate high-current switches, which will physically disconnect the Drive Motors from the Motor Driver. This FAIL-SAFE feature would only be used in the case of an unlikely catastrophic failure of the Motor Driver (they tend to fail to Full On).

The second photo below shows this feature of the Motor Controller. The switches are mounted in opposing directions so that actuating the servo situated between them causes both switches to move to the OFF (or ON) position at the same time.

Step 3: Parts and Assembly The author's total cost for this project so far, not including the Spectrum DX7 Transmitter, is around $1300, with the biggest expenses being: Motor Driver ($430), 2 Min Kota Trolling Motors ($240), Aluminum ($135), Battery ($90), and Charger ($60). Also: 32 LEDs, Various Cables, Connectors, Switches, and I.C.s ($175+), RC Receiver ($60), Cam Bolts ($40), Backup Arduino uController ($35), etc. The following files describe the system, and Hi-Res copies of the Images can be downloaded via the provided links: • SystemDiagram.gif is a complete diagram of the system, including Operator Panel, Motor Driver, and Motor circuitry. • SNPCTRL.EXE is a program, which accurately simulates interaction with the Control Unit, except that SIPS and PUFFS are simulated by pressing the CNTRL and ALT keys.

Remember to enter the Startup Sequence first! See 'The SNPCTRL.EXE Program' in the next step for more info! • SANDPSWITCH.GIF illustrates a typical SIP&PUFF switch. • OP-PANEL.GIF is a schematic diagram for the Operator Display Panel. Step 4: Details of the Design: The Mechanics: • Pontoons & Motors: The pontoons are constructed from waterproof closed-cell foam.

I used some rather rigid construction foam, but you can use the foam of an old boogie-board or similar waterproof foam. The pontoons are approximately 48 inches long, 9 inches wide, and 5-6 inches deep. In use, the pontoons draw less than an inch of water (not including the motors). Aluminum plates are bolted to the foam, top and bottom, with bolts running through the foam, to provide a sturdy base to attach the Motor Mount and Outrigger Pole Stantions to. The CAD drawing shows the Motor Mount separated from the Outrigger Pole Stantions by about 6 inches. In the final desigh, this dimension is reduced to about 3 inches.

The Motor Mount and Outrigger Pole Stantions are bolted to the upper Pontoon Plate from underneath with countersunk screws. The author bought the Minkota-30 trolling motors from Amazon.com for $117 each. The upper part of the down-shaft was removed before it was started. Only the larger gauge Red and Black wires were used for this project. A PWM (Pulse-Width-Modulated) drive system was used. The wires from the Speed Coil in the motors were cut, taped, and pushed back down into the down-shafts. • Outrigger Poles: The Outrigger Poles in the current design are made from 1-inch diameter galvanized steel electrical conduit ($6) bent on a conduit bending press.

In the next design update, there is a plan to make the Outrigger Pole as one piece that runs from one Pontoon all the way over to the other. The author will also try to make it out of aluminum pipe. In order to incorporate the Outrigger Pole as one piece, the Stantions of the Deck Plate will have to be modified to allow the Outrigger Pole to drop in from the top as opposed to the current design where the two poles slide in from the side. • The Deck Plate: The Deck Plate is made from a piece of 1/2 to 3/4 inch marine or exterior plywood, and is approximately 13 by 31 inches in size. In the current design, two aluminum plates are fastened to the plywood to facilitate mounting the Outrigger Stantions from underneath with countersunk screws.

My update will simply make this a single plate, in addition to modifying the Stantions to allow the Outrigger Pole to be droped in from above. All the Outrigger Pole Stantions are custom made braces slightly larger than the diameter of the Outrigger Poles, and utilize a bicycle seat Cam Bolt to squeez them tightly to the Outrigger Poles.

Slotted holes at the sides of the Deck Plate keep the mounting straps firmly in the desired location. These straps are ratchet style cargo tie-downs available at Freight Distributors or just about any home improvement store. Refer to the System Diagram and Operator Panel Schematic for most of the information required to put the electrical system together.

• The author used a VERY robust Motor Driver, the RS160D (~$430), from Robot-Solutions (www.Robot-Solutions.com). It was as if this driver was specifically designed for my project as it provided virtually every required functionality. In reality, the primary intended users are those guys that make the giant fighting robots.

• The Operator Panel was designed and built exactly to the criteria depicted in the schematic. The updated design adds two additional LEDs to indicate actuation of the Sip & Puff switch. All LEDs are from DigiKey (www.DigiKey.com), part #s: Red = SSI-LXR4815SRD, Green = SSI-LXR4815GD ($1.25 each).

• The Main Power Switch is available outside of the enclosure and concealed under a plastic film canister. The switch secures the lid of the film canister to the side of the enclosure and the tethered film canister is popped into place over the switch, effectively making it watertight. • Two DesignFlex, Inc. Pressure/Vacuum switches, available from Global Industrial Products were used for the Sip&Puff switch. The airline from the operator is Y-ed to 2 lines then one is connected to the High port of one switch (pressure = Puff) and the other is connected to the Low port of the other switch (vacuum = Sip). • A TTL to RS-232 Level Shifter board from SparkFun (SparkFun.com), part# PRT-08780 ($10) was used to interface between the Arduino and the Motor Driver, and, of course, the Arduino u-Controller itself, available from SparkFun with part# DEV-00666 ($34). • The Man Overboard Switch is a Magnetic Reed Switch from a home security system. The Switch side is secured to the inside of the Operator Panel to keep it out of the weather.

The Magnet side has a lanyard, which can be tied to the rider's life vest. • Aside from the Sip&Puff Straw (and Power Switch), the magnetic-reed MOB Switch is the only other physical input into the system. The system starts up in Practice Mode (motors will not run), and each time the Magnet is removed and replaced, the system toggles in and out of Practice Mode. Taking control of the system with the RC Transmitter will also take the system out of Practice Mode. The Software: The first Code segment below is the top of the State Machine Table, and the second Code segment is the entire operating loop! There are only a few other functions, one gets the Safety Startup Sequence, one monitors Fault and Man-Overboard conditions, and others control the LEDs and send Speed Commands to the Motor Driver. Referring to the Operator Panel Schematic, the following code sets the LEDs.

Step 5: The SNPCTRL.EXE Control System Simulator Program The SNPCTRL.EXE Control System Simulator Program allows a prospective rider to experiment with the operation of the Sip & Puff Motor Controller from the comfort of his or her computer desk. Sip & Puff Timing and Visual Feedback is virtually identical to the actual interface incorporated in the system. --Download and execute the SNPCTRL.EXE program. To download the Control Program, click on the SNPCTRL.EXE link, or type: www.DisabledAdventurers.com/SIPNPUFF/SNPCTRL.EXE into the Address Bar of Internet Explorer, press ENTER, select Run or Save. The program runs best in full-screen mode. Press CNTRL-ENTER to switch to full-screen mode. Pressing the CNTRL and ALT keys simulate a Sip and Puff into the system.

Enter the Safety Startup Sequence ( CNTRL-ALT-CNTRL-ALT) first! Press M to simulate Man-Overboard or Capsize. Press? for further Help in operating the Simulator. Press ESCto exit the program. Timing for the length of Sips and Puffs is very accurate in the simulator, and feedback on timing is given in the Switch Status (center-screen). In the future, the author hopes to build a second 'real' control system that can be used as a simulator for this purpose. I am in the process of designing a PCB (Printed Circuit Board) that will encompass all the electronic components, and nearly all of the electrical components, of the system.

Rules Implemented in the Code: Pressing M simulates Man-Overboard, Capsize, or Motor Overload. Very long (held) sips and puffs are simulated in this code. (See Actual Operating Code notes below) The maximum differential between the left and right motors is 7. Reverse motor speeds are limited to 5 (50% power). Hard turns slow the craft and move through turning on point. Changing speed when one motor is in reverse the other motor is in forward position, which causes both motors to stop until the next command is given.

When one motor is at stop, that motor waits for other motor to be at stop before proceeding in opposite direction with speed change command. In the Actual Operating Code: When ever both motors reach stop in very long speed change commands, the user must release the switch in order to issue further commands. For instance. Ace The Ielts Full Book Free Download on this page.

The craft is set to fast forward and user holds a very long Sip: Both motors will decrease to stop and will not go into reverse until the user releases the Sip and then gives a further command. Step 6: Full Speed Ahead Top speed is just under 3.7 MPH, according to my GPS.

After 4 hours and 6.2+ miles, the motors were still running strong, producing ~3.3 MPH into the wind, and the main battery still showed 12.15 volts. The Motor Driver and Arduino Controller, as well as the Sip&Puff Interface, will continue to operate down to 5 volts.

Step 7: RC vs. Sip & Puff RC Remote Control Override capability is incorporated into this design mainly to allow a safety observer to assist the highly disabled rider who will be operating the kayak truly 'hands-free' via the Sip & Puff switch interface. It is, however, still possible that more able-bodied riders, and fishermen, for instance, may like to control the kayak, themselves via the RC Transmitter. Still, I have found that using the Sip & Puff interface is WAY more, “fatigue-free”.

In open spaces, long periods of travel are somewhat 'set and forget' and minor course changes, or corrections, are accomplished with the lightest (and shortest) of tiny sips and puffs against the straw. The caveat is that the RC Transmitter is a bit more intuitive and provides for extremely fine control of the kayak. With a few minutes of practice, though, a Sip & Puff rider can learn to, for instance, back the kayak precisely to the corner of a dock, or steer down a winding channel way of 10-15 feet in width. Author: kayakdiver. Muffin Matchup is designed to engage young children in sorting, counting, matching, and early math skills along with fine motor/manipulative skills. It can be used with children with upper extremity disabilities associated with developmental delays, cerebral palsy, or Down’s syndrome. This set of materials includes a muffin pan, 60 colorful mini muffin counters, 1 Squeezy Tweezer, 12 double-sided sorting inserts, two foam dice, (one for color, one for number), and an Activity Guide. It can be used a classroom center, individual, or group play.

Alphabet Uppercase/Lowercase Letter Sort are word worksheets for young learners or students with learning disabilities to teach them letters/words. This activity teaches letter recognition in different fonts. The teacher prints in color and laminates it for a center or laminates the whole page and then cuts out the letters at the bottom. Can be stored in an envelope or baggie for use in word work centers. The teacher may also print in black and white to use as morning work, take-home or a fast finisher activity.

If not laminated, the teacher can put product in a protective sleeve such as a page protector, plastic pocket or an unsealed individual laminating pouch. Gross Motor Activities for the Inclusive & Special Needs Classroom: The Courageous Pacers Program Complete Kit is an exercise program for children with special needs to have them walk 100 miles and lift 10,000 pounds in a year to be used in a classroom setting. The Classroom Chart assists in recording scores of 12 students' progress in walking and lifting and is a good visual tool to view progress. The self-standing Flip Book provides a large picture of each activity from the Courageous Pacers Chart on a single 8 ½ inch x 11 inch card stock page that can be shown to students when introducing an activity. When the leader flips the page to show a new activity, the instructions for that activity are shown on the page facing the leader. BUDDY is a companion robot that improves everyday life for any individuals that would benefit from companionship such as the elderly, or individuals with mental or cognitive disabilities. BUDDY protects offers assistance in the kitchen, entertains the family with music and videos, acts as a calendar and alarm clock and interfaces with popular smart home solutions, among many other activities.

Specific to elder care, BUDDY features fall detection and unusual inactivity detection, medication reminders, and easy social interaction and access to technology. He also features speech recognition; human detecting, recognition, and tracking; and text to speech. BUDDY is built on an open-source technology platform making it easy for global developers to build applications. Step 1: Design Process • Brainstorm • Research patents, technology, and materials • Sketch original designs and figure out measurements Step 2: Gather Materials • Four legged walker • Single-Wheel Axis Motor and Electrical System from an electric scooter • Two 12 volt lead acid batteries • Potentiometer Case • Leg Braces • Box • Planks of wood • 3 wheels for wood platform • Control Panel • Two hinges • Screws • Two brackets • Zip-ties Step 3: SolidWorks • 3D Model all parts! Step 4: The Electrical System • You will need an electrical system to motorize the walker. We used an electric system from an old electric scooter. Take apart electric scooter for the motor and electrical system.

• Document all parts (what they are and where they were). • Bench-test electrical system. • Make sure we re-wired everything correctly and everything is working. • Sketch schematic of electrical system. • This will be used later, when integrating the electric system with the walker. Step 5: The Walker • The standard, store bought walker will act as our frame and base for the project. • Take off all legs of the walker, replacing the back two with the front two.

• We did this so the back two legs have wheels attached and will be able to move/roll when the motor is on). • Create a long wooden platform for the walker legs to attach to the motor frame. • Drill holes for the legs to fit into. • Screw it into the motorframe.

• 3-D print plugs to fit the inside of the walker legs (make sure it is a snug fit). • Hammer these into the walker legs. • Place legs into the holes in the wooden platform. • Drill into the plugs from the bottom of the wooden platform, securing the walker to the motor frame. • 3D model a clamp and brace to create more support for the legs in SolidWorks.

• Attach and drill it into the wooden platform. Step 6: The Platform • The walker will need a platform that can be folded out of the way. This will be used when the user wants to take a break from using the walker normally, and wants to use the motorized function.

• Cut out a thick and stable piece of wood that will fit on the inside of the walker and is big enough to fit two feet onto. • Drill holes into the front of the wood plank for the hinges. • Drill holes into the motor frame for the other side of the hinges. • Drill holes on the back of the wood plank, enough for three wheels. • The wheels will be placed on the back corners and in the top-middle.

• Screw in the wheels and hinges. Step 7: The Electrical Box • We need a box to keep the batteries, battery charger, and electrical system all together and contained.

• Measure out five pieces of thin wood. • Nail it together, adding wood glue to any junctions for extra support.

• Screw it into the wooden platform on the motor frame. • Place batteries and electric system inside. • Create a cardboard cover to keep everything contained and tape it on top.

Step 8: The Control Panel/Dashboard • The control panel will be created in a dashboard style, making the user interface easy and simple. • Take note of all components needed on the control panel.

• Measure out dimensions and spacing. • 3D model the control panel in SolidWorks. • Use a laser cutter to cut the control panel out of acrylic. • Place all components into the control panel, and hook it up to the electrical system. • Drill holes for the brackets, and screw brackets into place on the walker.

Step 9: The Potentiometer Case • In order for the user to move forward on the walker (when using the motorized function), the user will need access to the potentiometer. • Measure the dimensions of the potentiometer.

• 3D model a case that molds to the right-hand handle of the walker, in SolidWorks. • 3D print the case. • Place the potentiometer into the case and drill it into the handle. • Hook up the potentiometer to the rest of the electrical system. Step 10: Wiring • Make sure all wiring is connected and in the right place.

• Double check using the electric wiring diagram. • Shorten and extend any wiring that needs it. • Zip-tie all wiring to the walker frame, out of the way. Step 11: Test it! There are a couple of small items to take care of but it works! The obvious next step is to take this concept to the next level and make the next version with a scratch-built frame and perhaps individually driven wheels to aid in steering.

Author: Tustin High T-Tech. Blind Abilities is a mobile application that produces podcasts and blogs dealing with accessibility, technologies, devices, and enhancing the opportunities in the job market for the blind, visually impaired and deaf-blind. Hosts of podcasts and authors of blogs interview developers, users, and advocates in the field of blindness. Blind Abilities is a community of blind, deaf-blind and low vision members sharing experiences and offering advice when needed. With this app, users are always connected to the latest episodes and can star episodes and save them to a list to enjoy them over and over again.

This app features a car mode where users can rotate their phone to display larger playback controls. The Boop Light Detector is a mobile application developed for blind and visually impaired to detect levels of light and interpret this information with sound. It allows its users to detect whether lights are on or off. It covers a broad range of light levels which span from sensing daylight through open windows to checking whether the indicator light is on for a WiFi router.

To use, permission to use the camera (first time only) must be accepted. Then, the blind or low vision user would point the phone towards a light source, listen, and feel as their phone changes tone and frequency of vibration while getting closer to the light. Only the light level at the center of the camera (directly perpendicular to the phone face) is measured.

Pointing the phone directly at the light source will get the highest reading. Other features include: Volume control: • Volume control buttons on side of phone control Boop's playback volume. • Mute will completely turn off the sound. • Toggle vibrate on or off manually with the switch at the bottom of the app. Voice over features: • Two finger scrub to turn vibrate on or off.

• Two finger double tap to close the app. • Tap center of the app to read light level. Is a functional application designed for more accurate communication intended for low vision users. This App allows for the lookup of contracted (also known as Grade 2) Braille signs using the Unified English Braille (UEB) code and/or using the older English Braille American Edition. Users can search either by the dots they see on the page or by the English abbreviation or punctuation they seek. For example, they can type into the 'Dots Seen' field dots 1 2 3 and this will tell them that it is the letter 'L' or the word 'like' depending on context of its use. Conversely, they could type in the word 'like' into the English phrase field and it would tell them the Dots needed, which in this case would be Dots 1 2 3. This App is intended to be used as a reference tool only; it does not function as a translation tool.There is an index of all Braille contractions that can be browsed at a glance. BrailleTexts is an evolution of BraillePad, an app designed for visually impaired individuals that introduced the Visual Braille concept.

With BrailleTexts a person who is visually impaired can type documents using the same braille coding as used on a mechanic brailer at the same rate: 4 characters per second. The user can rotate the device in landscape mode to activate the braille pad feature and start typing with their fingers. The Ormesa 203-5 Shower Chair is designed for individuals with severe mobility disabilities or the elderly who cannot stand to shower. The chair's fireproof plastic allows a wide perspiration and is highly water-resistant.

The sufficiently elastic covering assumes the shape of the shoulder and of the bottom. Winding Headrest is adjustable in tilt, height, and in the front-back position. Triangular shaped Winding Backrest can be fixed in 2 positions in order to establish 2 depths of the seat. The chair's seat has a 15-degree tilt in order to prevent its user from falling forward. Only 1 overturn-able footrest.

Tricycle 207 Sport (models 207-1, 207-2, 207-3, 207-4, 207-5) are custom bicycles designed for users with lower extremity disabilities to ride safely and securely. The height of the steering column of the handlebar plus the forward position of the central motion, with respect to the saddle, equals the correct upright posture which makes the pedal thrusts easier and helps with breathing.

Some or all of the models include a locking mechanism, front brake, bell, light, rear wire basket, folding frame, fixed pinion (to cycle backward), an economic saddle, splashboards, and wheels. Dimensions: • Model 207-1 is 37.8 inches Length x 20.8 inches Width x 29-34.6 inches Height. • Model 207-2 is 44.5 inches Length x 24.4 inches Width x 31.8-37.4 inches Height. • Model 207-3 is 53 inches Length x 26 inches Width x 36.6-42.5 inches Height. • Model 207-4 is 63 inches Length x 28.3 inches Width x 40.9-46.4 inches Height. • Model 207-5 is 69 inches Length x 30.3 inches Width x 44.8-50.3 inches Height.

• Weight: 27.5 pounds (model 207-1), 33 pounds (model 207-2), 40.7 pounds (model 207-3), 48.5 ponds (model 207-4), 53 pounds (model 207-5). • Capacity: 60 pounds (model 207-1), 99 pounds (model 207-2), 132 pounds (model 207-3), 198 pounds (model 207-4), and 220 pounds (model 207-5). • Color: Models 207-1, 207-2, 207-3, 207-4, and 207-5 come in red, white, and blue. Fluency Tutor™ for Google is a leveled reading assessment designed to help teachers support struggling and emerging readers using Google Apps for Education. The app enables teachers to select and assign reading passages based on content or lexile level and share them with individual students or groups via Google Drive. Students study and record themselves reading the passage aloud. The app provides a private, relaxed environment to practice reading at school or home, and access to literacy tools such as a picture dictionary. Recorded passages are automatically shared back with teachers, enabling them to listen remotely and provide immediate feedback and follow-up assignments to improve word recognition, reading speed, accuracy, and fluency. Any teacher using Google Apps for Education in their school or district can install Fluency Tutor for Google from the Chrome Web Store. The Premium version includes access to tools for assessing student recordings based on word accuracy, hesitation, and other metrics.

There are also analytical tools for monitoring progress to identify future learning needs. The creator participated in a 3 day event called TOM in which makers and people with disabilities have 72 hours to plan, design, and build solutions for a specific daily challenge the need knower has.The client is a 26 years old woman with severe Cerebral Palsy with very limited movement. She is able to move her left foot and some of her right hand fingers. The team created an assistive technology to enable her to be involved in scanning documents for archiving at work. The team wanted the user to be able to press a foot switch that would open the scanner lid and then press it again to close the scanner lid and automatically operate the scanning.

This was developed for the user to work in pairs; with a partner who puts the pages in each time for scanning. Step 1: Equipment • HP Scanjet 200 Flatbed Scanner • Orby Switch • Arduino Uno • Arduino 1.6.6 IDE • Servo - Hitec HS-805BB with a Four Point Mega Horn attached • Computer with scanner application • MDF, Plexiglass • Weights • Wires, breadboard, screws, wood glue, etc.

Step 2: Plan. Consulting with a mechanics engineer, the author decided to base the solution on the way a seesaw works. It was decided to extend the scanner lid and attach a weight to it to create a lever so that the center of balance (the fulcrum) would be right behind the scanner hinge. Then a servo engine would easily be able to tip the lid open and close. Step 3: Extending the Scanner Lid • Cut a sheet of plexiglass to fit the scanner lid and extend it by 8 cm at the back • Attach it to the original scanner lid. As a temporary solution we used simple office clips to attach it. There are much nicer fasteners you can use.

• We then added a metal cylinder at the end of plexiglass. You can calculate the exact weigh you need or you can just trial and error with different scrap metal to find the right one. It should be heavy enough to tip the lid open when you touch the plexiglass lid around 2 cm in from the back and light enough to tip the lid close when you touch the plexiglass lid around 6 cm in (counting from the end of the scanner in the direction of the front of the scanner). Step 4: Electronics. The author used an Arduino Uno to get an input from the foot switch, trigger the servo motor and when the lid is closed, activate the scanner application.

Using an Uno and not a Leonardo meant we weren’t able to activate a mouse click or a enter event on the computer with the scanner application. For more information on the hacking needed: NicoHood/HoodLoader2. Make arduino uno work like leonardo Step 5: 3D Printing the Rod Component. The final component we needed was the rod that actually pushed the lid back and forth. The team 3D printed a component that fits on the servo engine’s ‘four point mega horn’ attachment with a rod connected to one point. The original Solidworks file can be found of the author’s website. Step 6: Housing the Scanner.

In this solution, the scanner needed to be placed 6 cm higher than the table so we build a simple case with MDF spray-painted white. Inside the case we left room for the electronics to fit in. In addition, you need to build an MDF structure to hold the engine and keep it from moving around. Step 7: Putting it all together. • The motor with the rod component sits on the left side of the scanner, adjacent to the case.

The exact y position of the motor can be calculated or as we did, you can just move it back and forth a few millimeters each time, activate the engine and tweak it so that the rod reaches the right point at the back to make the lid open and then the right place somewhere in the middle of the lid to make it close. • Attach the engine housing including the engine without the rod component to the side of the scanner case. • Place the rest of the electronics within the case and secure them in place with screws or hot glue. • Put in the scanner with the extended lid and weight.

• Screw back the rod component on to the servo. • Activate the scanner application on the computer • Attach the foot switch. Step 8: Summary. The foot switch was attached to the wheelchair to allow the user to easily press and open and close the lid and see the scanner working. Author: IreteH.

The Sign Language Rings are designed to translate the hearing impaired’s sign language motions into voice. The device is intended to help hearing impaired users by translating voice into text which is displayed on top of the bracelet. The Rings are worn around the user’s fingers, and the bracelet is the display screen to view the text. These are wearable devices and come in a set of two objects- the rings and the bracelet. They are a collection of six rings that the hearing impaired person wears on the thumb, index finger and middle finger of each hand. The bracelet is worn on either wrist. The two come as a set and are of no use individually. The Device works when a person talks using sign language, these rings ‘comprehend’ the different movements made by the hands and communicate this information to the bracelet.

The bracelet then converts the sign language into words which are then heard from speakers embedded within the bracelet. These items can work vice versa as well. Meaning the bracelet ‘hears’ what the other person is saying and converts it into text that appears on the bracelet itself. The hearing impaired person can then just simply read what is written on the bracelet, thus making the communication circle complete. Features and advances include: Some of the sentences can also be pre-recorded within the bracelet. To pack them up and prevent them from getting lost while not in use, the rings can be fixed within the bracelet. Helps hearing impaired users gain self-confidence and live without dependence on interpreters.

The Walk’n’Chair is a folding wheeled walker with seat for people with lower extremity, mobility and walking disabilities. The Walk’n’Chair was designed primarily provide for stable navigation and travel over gravel, dirt and other rough surfaces and easier maneuverability up and down street curbs. It has four wheels; two large front wheels similar to manual wheelchair wheels and two rear casters with oversized tires. There are two hand brakes, one located on each of the handlebars, and each brake stops one of the large wheels. The brakes are lockable. The seat is located on the front of the frame between the large wheels.

With the hand brakes locked, the user can reposition the seat back frame and handles, insert optional footrests, converting the Walk’n’Chair to a wheeled chair once the brakes are unlocked. There is a collapsible metal accessory basket that can be expanded and attached to the seat back frame and used for carrying items. DIMENSIONS: The open width is 30 inches, and the folded width is 15 inches. The seat measures (DxW) 10 x 15 inches, and the seat to floor height is 21 inches. CAPACITY: 250 pounds. WEIGHT: 35 pounds.

Nadine is a social companion robot that is designed to provide emotional support and companionship to the elderly, individuals with mental or cognitive disabilities, or anyone that would benefit from 24-hour companionship. Nadine is using a 3D camera and can detect and recognize people due to a binary pattern algorithm. Then she has a short time memory linked to her language database.

When we tell her something, she will analyse what is being said and link to the database, itself linked to the memory. She will dynamically augment her memory and database with the new facts and will answer taking into account of what she was said, what it means in terms of emotions, if she already met this person, and what this person said previously. She will then generate the right answer.

As words and sentences are linked to her emotional model, her voice intonation, her gestures and her reaction will depend of what was said, and what she had in memory. It is in fact a complex system. Nadine is able to monitor someone and speak different languages, including English, French, German, Chinese, and Italian. She can read stories, train people in languages, keep conversation going, play games, etc.

Pragmatic Organization Dynamic Display (PODD) is a print-based low-tech assistive technology on a CD designed for for people supporting children who are learning to communicate using aided symbols (pictographs, graphic symbols, whole written words). Therapists, teachers, and parents will all have the opportunity to access the materials in this resource for their clients, students, children and young people. This resource is meant to help minimize common difficulties encountered by students who use multi-level communication books. PODD lets individuals design, produce and implement personalized communication books to suit their varying communication, language, sensory, and physical access requirements.

With PODD, an individual can help students find the vocabulary they need and move between levels (pages), access vocabulary that produces common and unpredictable messages quickly, use each students customized set of PODD boards throughout his/her school career even as skills change, and set up a student’s PODD for when they are living independently and working in the community. Boardmaker® with Speaking Dynamically Pro v.6 is designed for individuals with significant speech or language disabilities, to build on the features of Boardmaker® Plus! And transform any computer into a speech output device and learning tool.

It features natural sounding voices, word prediction, and includes all the features of Boardmaker® Plus!, including symbols supported in 44 languages. Users can use the Picture Communication Symbols™ (PCS) to create interactive activities, as well as printed materials.

Autocad Mep 2013 Hangers For Sale. With Boardmaker® with Speaking Dynamically Pro, teachers can involve students in an inclusive setting, provide opportunities for communication, teach and reinforce curriculum concepts, encourage and promote writing, make interactive books adapted for each student/curriculum, provide assessments on the computer, and train individuals on using symbols, switches, and dynamic displays. It includes more than 4,500 Picture Communication Symbols™ (PCS) in both color and black-and-white, which are supported in 44 languages. There are over 350 print templates and sample boards, and 600 interactive sample boards that can be adapted to a students' needs or boards that can be created from scratch. Thumball™: Who Are You? Is a soccer ball that is both educational and entertaining, designed to help those individuals with autism, emotional, and communication disabilities and students learning English as a second language by promoting appropriate social skills, developmental and emotional intelligence. Printed on each panel of a Thumball™ is a word, graphic, photo or logo relating to a specific subject. Players toss it and in their hands read what is written on the panel beneath their thumb, answer themselves or ask another player the question. For example, if their thumb lands on 'Healthy Snacks,' they could say 'apples with peanut butter.'

Thumball™ is soft, safe and easy to toss and catch. The Freedom Staff Portable Vehicle Hand Controls is a system that is designed to help users with physical challenges drive safely. The controls can travel from vehicle to vehicle with the user,and can be quickly installed in any automobile with an automatic transmission, and packed and stowed when not needed. Features include: • Handle 13 inches long • Brake Adjustable from 22-30 inches • Accelerator Adjustable from 19 1/2 - 26 3/4 inches • Universal - Fits most vehicles • Steering wheel knob for 1-handed steering • Installation in minutes with no tools • No modifications to your vehicle • Suitable for use in rental cars • Adjustable and customizable • Aluminum and stainless steel, lightweight, and durable • Safety chain so that brake cannot become dislodged. Tobii Gaze Viewer is an assessment tool that helps a teacher understand a student's physical capabilities, cognitive understanding, and ability to use an eye tracker with a Tobii Dynavox eye tracker (like PCEye Explore). With this software, teachers can save data as single images or movies, with heat maps and gaze plots, and use them to assess an individual’s physical capabilities and cognitive understanding.

It gives them insight into what a student understands and how they process visual information. Recording requires 500 MB of free disk space and some additional space for saving your video file. The used disk space for your recording projects is very much depending on your system, the screen resolution, the recording length and if you record gaze and sound or gaze only.

One minute of recording requires approximately 140 MB for Gaze only and 165 MB for Gaze and Sound with a screen resolution of 1920 × 1200. Tobii Gaze Viewer will free up the used disk space automatically when the recorded project is closed. Requires Tobii Assistive Technology eye trackers, like PCEye Go. Tobii Gaze Viewer works with Tobii Dynavox Assistive Technology eye trackers and most computer systems but for a good performance we recommend the following minimum system requirements: • Operating System: Windows 7, Windows 8, Windows 8.1 or Windows 10 • A multicore processor (dualcore or more) with at least 1.5 GHz • 2 GB RAM memory • Graphics 60MB VRAM • Pixel shader 2.0 or higher • 100 MB free disk space for the installation of the Gaze Viewer software. Boardmaker® Plus! Featuring PCEye Explore creates an exciting and educational experience for entry-level eye tracker users to give teachers, therapists, and parents new technology to use when helping quadriplegics or those with mobility and severe physical disabilities learn how to use eye-tracking software. This new technology can complement, or be used as an alternative to scanning and/or switch scanning.

This helps users understand that when they look at the screen, something happens. Users can create simple cause and effect activities in Boardmaker Plus to help students learn how to use eye tracking. Users can create multiple user profiles and magnetic mounts, and change settings between different users and physical locations.

Dimensions: 12.6 inches Length x0.8 inches Width x 0.7 inches Height. Switch Interface Pro 6.0 is a computer interface that helps students with severe physical disabilities and mobility impairments by letting them practice essential switching skills and develop cause and effect and choice-making skills through using up to 5 switches at once to run their switch-enabled software.

User can push a single button to change function. It supports 2 switch scanning. Bright lights indicate which switches are active. It requires no software and can be used with Windows and Mac.